Skip to Content
Merck
  • Structural attributes of model protein formulations prepared by rapid freeze-drying cycles in a microscale heating stage.

Structural attributes of model protein formulations prepared by rapid freeze-drying cycles in a microscale heating stage.

European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V (2014-03-13)
Björn-Hendrik Peters, Ferdinand Molnár, Jarkko Ketolainen
ABSTRACT

Downscaled freeze-drying was demonstrated to be a valuable alternative for formulation development and optimization. Although the pore structure is known to exert a major influence on the freeze-drying cycle, little is known about the ones of microscale preparations. This study describes morphology evaluation methods for lysozyme formulations prepared in one microscale processing option and the assessment of fundamental product quality criteria. Scanning electron microscopy (SEM) revealed cooling rate dependent pore size variations at the nucleation site which diminished as the rate increased. Micro-X-ray computed tomography (μ-CT) showed that porosity generally increased in the sample from bottom to top, the pore size fractions shifted toward larger pores in elevated sample levels, and horizontal homogeneity was found throughout each sample with minor deviations in the bottom region. Furthermore, the event of microcollapse could be identified and quantified. Low residual moisture was achieved repeatedly and the procedure did not influence the post freeze-drying bioactivity. This microscale heating stage is a valuable option to reduce overall cycle times and cost, and to prepare freeze-drying formulations with high reproducibility. The mapping tools permit a quick but detailed insight into the structural features resulting from the process environment and processing conditions.

MATERIALS
Product Number
Brand
Product Description

Supelco
Naproxen, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Sucrose, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol solution, NMR reference standard, 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Methanol-12C, 99.95 atom % 12C
Supelco
Naproxen, VETRANAL®, analytical standard
Sigma-Aldrich
Sucrose, puriss., meets analytical specification of Ph. Eur., BP, NF
Sigma-Aldrich
(S)-(+)-6-Methoxy-α-methyl-2-naphthaleneacetic acid, 98%
Sigma-Aldrich
Sucrose, BioUltra, for molecular biology, ≥99.5% (HPLC)
Millipore
Sucrose, suitable for microbiology, ACS reagent, ≥99.0%
Supelco
Sucrose, analytical standard, for enzymatic assay kit SCA20
Sigma-Aldrich
Sucrose, ≥99.5% (GC)
Sigma-Aldrich
Sucrose, for molecular biology, ≥99.5% (GC)
Sigma-Aldrich
Sucrose, ≥99.5% (GC), BioXtra
Sigma-Aldrich
Sucrose, ACS reagent
Sigma-Aldrich
Sucrose, ≥99.5% (GC), BioReagent, suitable for cell culture, suitable for insect cell culture
Sigma-Aldrich
Sucrose, Grade I, ≥99% (GC), suitable for plant cell culture
Sigma-Aldrich
Sucrose, ≥99.5% (GC)
Sigma-Aldrich
Sucrose, ≥99.5% (GC), Grade II, suitable for plant cell culture
Sigma-Aldrich
Naproxen, meets USP testing specifications
Sigma-Aldrich
Sucrose, meets USP testing specifications
Sucrose, European Pharmacopoeia (EP) Reference Standard
USP
Sucrose, United States Pharmacopeia (USP) Reference Standard
USP
Naproxen, United States Pharmacopeia (USP) Reference Standard
Naproxen, European Pharmacopoeia (EP) Reference Standard
USP
Methyl alcohol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Methanol, NMR reference standard
Supelco
Mannitol, Pharmaceutical Secondary Standard; Certified Reference Material
Millipore
D-(+)-Trehalose dihydrate, ≥99.0%, suitable for microbiology, composed of two α-glucose units that is used as a protectant, stabilizer and to support proper folding
Sigma-Aldrich
D-Mannitol, tested according to Ph. Eur.
Millipore
D-Mannitol, ACS reagent, ≥99.0%, suitable for microbiology