Selenium speciation using capillary electrophoresis coupled with modified electrothermal atomic absorption spectrometry after selective extraction with 5-sulfosalicylic acid functionalized magnetic nanoparticles.

Selenium speciation using capillary electrophoresis coupled with modified electrothermal atomic absorption spectrometry after selective extraction with 5-sulfosalicylic acid functionalized magnetic nanoparticles.

Journal of chromatography. A (2015-04-14)

Lizhen Yan, Biyang Deng, Caiying Shen, Chanjuan Long, Qiufen Deng, Chunyao Tao

ABSTRACT

A new method for selenium speciation in fermented bean curd wastewater and juice was described. This method involved sample extraction with 5-sulfosalicylic acid (SSA)-functionalized silica-coated magnetic nanoparticles (SMNPs), capillary electrophoresis (CE) separation, and online detection with a modified electrothermal atomic absorption spectrometry (ETAAS) system. The modified interface for ETAAS allowed for the introduction of CE effluent directly through the end of the graphite tube. Elimination of the upper injection hole of the graphite tube reduced the loss of the anlayte and enhanced the detection sensitivity. The SSA-SMNPs were synthesized and used to extract trace amounts of selenite [Se(IV)], selenite [Se(VI)], selenomethionine (SeMet), and selenocystine (SeCys2) from dilute samples. The concentration enrichment factors for Se(VI), Se(IV), SeMet, and SeCys2 were 21, 29, 18, and 12, respectively, using the SSA-SMNPs extraction. The limits of detection for Se(VI), Se(IV), SeMet, and SeCys2 were 0.18, 0.17, 0.54, 0.49ngmL(-1), respectively. The RSD values (n=6) of method for intraday were observed between 0.7% and 2.9%. The RSD values of method for interday were less than 3.5%. The linear range of Se(VI) and Se(IV) were in the range of 0.5-200ngmL(-1), and the linear ranges of SeMet and SeCys2 were 2-500 and 2-1000ngmL(-1), respectively. The detection limits of this method were improved by 10 times due to the enrichment by the SSA-SMNP extraction. The contents of Se(VI) and Se(IV) in fermented bean curd wastewater were measured as 3.83 and 2.62ngmL(-1), respectively. The contents of Se(VI), Se(IV), SeMet, and SeCys2 in fermented bean curd juice were determined as 6.39, 4.08, 2.77, and 4.00ngmL(-1), respectively. The recoveries were in the range of 99.14-104.5% and the RSDs (n=6) of recoveries between 0.82% and 3.5%.

MATERIALS

Product Number

Brand

Product Description

229865

Sigma-Aldrich

Selenium, powder, −100 mesh, 99.99% trace metals basis

209651

Sigma-Aldrich

Selenium, powder, −100 mesh, ≥99.5% trace metals basis

204307

Sigma-Aldrich

Selenium, pellets, <5 mm particle size, ≥99.999% trace metals basis

209643

Sigma-Aldrich

Selenium, pellets, <5 mm, ≥99.99% trace metals basis

HT-SE101

Selenium, pellets, < 5mm, ≥99.999%

GF66395212

Selenium, foil, 25x25mm, thickness 3mm, 99.95%

747343

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 5 nm avg. part. size (TEM), amine functionalized, 1 mg/mL Fe in H₂O, dispersion

747319

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size (TEM), PEG functionalized, 1 mg/mL Fe in H₂O, dispersion

747254

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size (TEM), carboxylic acid functionalized, 5 mg/mL Fe in H₂O, dispersion

790508

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 5 nm avg. part. size (TEM), PEG functionalized, 1 mg/mL Fe in H₂O, dispersion

747327

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 30 nm avg. part. size (TEM), amine functionalized, 1 mg/mL Fe in H₂O, dispersion

700320

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 5 nm avg. part. size, 5 mg/mL in toluene

700304

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 20 nm avg. part. size, 5 mg/mL in toluene

700312

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size, 5 mg/mL in toluene

725331

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 5 nm avg. part. size, 5 mg/mL in H₂O

725366

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 20 nm avg. part. size, 5 mg/mL in H₂O

725358

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size, 5 mg/mL in H₂O

310069

Sigma-Aldrich

Iron(II,III) oxide, powder, <5 μm, 95%

518158

Sigma-Aldrich

Iron(II,III) oxide, 99.99% trace metals basis

S8295

Sigma-Aldrich

Sodium selenate, BioXtra

747408

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 30 nm avg. part. size (TEM), PEG functionalized, 1 mg/mL Fe in H₂O, dispersion

747300

Sigma-Aldrich

Iron oxide(II,III), magnetic nanoparticles solution, 10 nm avg. part. size (TEM), amine functionalized, 1 mg/mL Fe in H₂O, dispersion

637106

Sigma-Aldrich

Iron(II,III) oxide, nanopowder, 50-100 nm particle size (SEM), 97% trace metals basis