Skip to Content
Merck
  • Root biomass production in populations of six rooted macrophytes in response to Cu exposure: intra-specific variability versus constitutive-like tolerance.

Root biomass production in populations of six rooted macrophytes in response to Cu exposure: intra-specific variability versus constitutive-like tolerance.

Environmental pollution (Barking, Essex : 1987) (2014-07-25)
L Marchand, F Nsanganwimana, J B Lamy, C Quintela-Sabaris, C Gonnelli, I Colzi, T Fletcher, N Oustrière, A Kolbas, P Kidd, F Bordas, P Newell, P Alvarenga, A Deletic, M Mench
ABSTRACT

Intra-specific variability of root biomass production (RP) of six rooted macrophytes, i.e. Juncus effusus, Phragmites australis, Schoenoplectus lacustris, Typha latifolia, Phalaris arundinacea, and Iris pseudacorus grown from clones, in response to Cu exposure was investigated. Root biomass production varied widely for all these macrophytes in control conditions (0.08 μM) according to the sampling site. Root biomass production of T. latifolia and I. pseudacorus in the 2.5-25 μM Cu range depended on the sampling location but not on the Cu dose in the growth medium. For P. australis, J. effusus, S. lacustris, and P. arundinacea, an intra-specific variability of RP depending on both the sampling location and the Cu-dose was evidenced. This intra-specific variability of RP depending on the sampling location and of Cu-tolerance for these last four species suggests that Cu constitutive tolerance for all rooted macrophytes is not a species-wide trait but it exhibits variability for some species.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Copper, rod, diam. 3.1 mm, 99.999%
Sigma-Aldrich
Copper, powder (dendritic), <45 μm, 99.7% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.25 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, powder, <425 μm, 99.5% trace metals basis
Copper (O), BCR®, certified reference material, rod
Sigma-Aldrich
Copper, powder (spheroidal), 10-25 μm, 98%
Sigma-Aldrich
Copper, shot, −3-+14 mesh, 99%
Sigma-Aldrich
Copper, ACS reagent, granular, 10-40 mesh, ≥99.90%
Sigma-Aldrich
Copper, powder, 99.99% trace metals basis
Copper, IRMM®, certified reference material, 0.1 mm foil
Copper, IRMM®, certified reference material, 0.5 mm wire
Copper (S, P), BCR®, certified reference material, chips
Copper, tube, 1000mm, outside diameter 6.35mm, inside diameter 4.93mm, wall thickness 0.71mm, as drawn, 99.9%
Copper, tube, 1000mm, outside diameter 0.25mm, inside diameter 0.05mm, wall thickness 0.1mm, as drawn, 99.9%
Copper, tube, 100mm, outside diameter 10.4mm, inside diameter 10mm, wall thickness 0.2mm, as drawn, 99.9%
Copper, tube, 1000mm, outside diameter 2.0mm, inside diameter 1.6mm, wall thickness 0.2mm, as drawn, 99.9%
Copper, tube, 1000mm, outside diameter 2.5mm, inside diameter 1.9mm, wall thickness 0.3mm, as drawn, 99.9%
Copper, sphere, 100pcs, diameter 1.0mm, precision sphere grade 200
Copper - O.F.H.C., foil, not light tested, 100x100mm, thickness 0.006mm, hard, 99.95+%
Copper - O.F.H.C., foil, 8mm disks, thickness 0.25mm, annealed, 99.95+%
Copper - O.F.H.C., rod, 100mm, diameter 38.1mm, as drawn, 99.95+%
Copper - O.F.H.C., foil, 8mm disks, thickness 0.075mm, half hard, 99.95+%
Copper - O.F.H.C., foil, light tested, 50x50mm, thickness 0.05mm, annealed, 99.95+%
Copper - O.F.H.C., foil, light tested, 100x100mm, thickness 0.025mm, hard, 99.95+%
Copper - O.F.H.C., foil, 6mm disks, thickness 0.25mm, annealed, 99.95+%
Copper - O.F.H.C., foil, 8mm disks, thickness 0.05mm, hard, 99.95+%
Copper - O.F.H.C., foil, not light tested, 50x50mm, thickness 0.006mm, hard, 99.95+%
Copper - O.F.H.C., rod, 100mm, diameter 12.7mm, as drawn, 99.95+%
Copper - O.F.H.C., rod, 100mm, diameter 25.4mm, as drawn, 99.95+%
Copper - O.F.H.C., foil, light tested, 300x300mm, thickness 0.05mm, hard, 99.95+%