콘텐츠로 건너뛰기
Merck
  • InVO4/TiO2 composite for visible-light photocatalytic degradation of 2-chlorophenol in wastewater.

InVO4/TiO2 composite for visible-light photocatalytic degradation of 2-chlorophenol in wastewater.

Environmental technology (2014-08-26)
J Rashid, M A Barakat, S L Pettit, J N Kuhn
초록

InVO4/TiO2 composite was synthesized via amalgamation of InVO4 with TiO2 (Degussa P-25) powders. Application of the produced composite was evaluated as a catalyst for visible-light photocatalytic degradation of 2-chlorophenol (2-CP) in synthetic wastewater solutions. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy energy dispersive X-ray microanalyses and nitrogen physisorption. The degradation of 2-CP was affected by solution pH, light intensity, photocatalyst dosage and 2-CP initial concentration. InVO4/TiO2 showed higher photocatalytic degradation of 2-CP as compared with Degussa P-25 TiO2. Complete degradation of 2-CP was achieved with the InVO4/TiO2 catalyst under optimized conditions (1 g/L catalyst with a pollutant concentration of 50 mg/L at solution pH 5 and irradiation time of 180 min). Comparatively, 2-CP degradation efficiency of 50.5% was achieved with the TiO2 (Degussa P-25) at the same experimental conditions. The study confirmed that InVO4/TiO2 has high potential for degradation of 2-CP from wastewater under visible-light irradiation.

MATERIALS
제품 번호
브랜드
제품 설명

Sigma-Aldrich
Titanium(IV) oxide, mixture of rutile and anatase, nanoparticles, <150 nm particle size (volume distribution, DLS), dispersion, 40 wt. % in H2O, 99.5% trace metals basis
Sigma-Aldrich
Titanium(IV) oxide, rutile, nanopowder, <100 nm particle size, 99.5% trace metals basis
Sigma-Aldrich
Titanium(IV) oxide, mixture of rutile and anatase, nanopowder, <100 nm particle size (BET), 99.5% trace metals basis
Titanium, IRMM®, certified reference material, 0.5 mm foil
Sigma-Aldrich
Titanium(IV) oxide, rutile, <001>, (single crystal substrate), ≥99.9% trace metals basis, L × W × thickness 10 mm × 10 mm × 0.5 mm
Sigma-Aldrich
Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis
Titanium, IRMM®, certified reference material, 0.5 mm wire
Sigma-Aldrich
Titanium(IV) oxide, rutile, powder, <5 μm, ≥99.9% trace metals basis
Sigma-Aldrich
Titanium(IV) oxide, rutile, 99.995% trace metals basis
Sigma-Aldrich
Titanium(IV) oxide, rutile, ≥99.98% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, wire, diam. 0.81 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)
Sigma-Aldrich
Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis
Titanium, rod, 200mm, diameter 2mm, annealed, 99.6+%
Titanium, rod, 100mm, diameter 16mm, as drawn, 99.99+%
Titanium, microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm2, permanent mylar 3.5μm support, 99.6+%
Titanium, rod, 490mm, diameter 2mm, annealed, 99.6+%
Titanium, tube, 1220mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%
Titanium, tube, 1000mm, outside diameter 6.35mm, inside diameter 4.57mm, wall thickness 0.89mm, annealed, 99.6+%
Titanium, rod, 25mm, diameter 16mm, as drawn, 99.99+%
Titanium, rod, 500mm, diameter 1.5mm, annealed, 99.6+%
Titanium, rod, 100mm, diameter 6mm, annealed, 99.6+%
Titanium, tube, 1000mm, outside diameter 25.4mm, inside diameter 23.62mm, wall thickness 0.89mm, annealed, 99.6+%
Titanium, rod, 200mm, diameter 5mm, annealed, 99.6+%
Titanium, tube, 100mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%
Titanium, rod, 200mm, diameter 4mm, annealed, 99.6+%
Titanium, rod, 1000mm, diameter 1.5mm, annealed, 99.6+%