콘텐츠로 건너뛰기
Merck
  • Sorptive extraction using polydimethylsiloxane/metal-organic framework coated stir bars coupled with high performance liquid chromatography-fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental water samples.

Sorptive extraction using polydimethylsiloxane/metal-organic framework coated stir bars coupled with high performance liquid chromatography-fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental water samples.

Journal of chromatography. A (2014-07-09)
Cong Hu, Man He, Beibei Chen, Cheng Zhong, Bin Hu
초록

In this work, metal-organic frameworks (MOFs, Al-MIL-53-NH₂) were synthesized via the hydrothermal method, and novel polydimethylsiloxane/metal-organic framework (PDMS/MOFs, PDMS/Al-MIL-53-NH₂)-coated stir bars were prepared by the sol-gel technique. The preparation reproducibility of the PDMS/MOFs-coated stir bar was good, with relative standard deviations (RSDs) ranging from 4.8% to 14.9% (n=7) within one batch and from 6.2% to 16.9% (n=6) among different batches. Based on this fact, a new method of PDMS/MOFs-coated stir bar sorptive extraction (SBSE) and ultrasonic-assisted liquid desorption (UALD) coupled with high performance liquid chromatography-fluorescence detection (HPLC-FLD) was developed for the determination of polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. To obtain the best extraction performance for PAHs, several parameters affecting SBSE, such as extraction time, stirring rate, and extraction temperature, were investigated. Under optimal experimental conditions, wide linear ranges and good RSDs (n=7) were obtained. With enrichment factors (EFs) of 16.1- to 88.9-fold (theoretical EF, 142-fold), the limits of detection (LODs, S/N=3) of the developed method for the target PAHs were found to be in the range of 0.05-2.94 ng/L. The developed method was successfully applied to the analysis of PAHs in Yangtze River and East Lake water samples.

MATERIALS
제품 번호
브랜드
제품 설명

Sigma-Aldrich
Aluminum, foil, thickness 8 μm, 99% trace metals basis
Sigma-Aldrich
Aluminum, powder, ≥91% (complexometric)
Aluminum, IRMM®, certified reference material, 1.0 mm foil
Sigma-Aldrich
Aluminum, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminum, pellets, 3-8 mesh, ≥99.999% trace metals basis
Sigma-Aldrich
Aluminum, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, granular, <1 mm, 99.7% trace metals basis
Aluminum, IRMM®, certified reference material, 1.0 mm wire
Aluminum, wire reel, 10m, diameter 1.5mm, as drawn, 99.999%
Aluminum, wire reel, 500m, diameter 0.30mm, as drawn, 99.5%
Aluminum, wire reel, 50m, diameter 1.0mm, as drawn, 99.999%
Aluminum, wire reel, 5m, diameter 0.25mm, as drawn, 99.999%
Aluminum, wire reel, 50m, diameter 0.25mm, hard, 99.99+%
Aluminum, wire reel, 5m, diameter 0.025mm, as drawn, 99.99+%
Aluminum, wire reel, 2m, diameter 3.0mm, as drawn, 99.999%
Aluminum, wire reel, 50m, diameter 1.0mm, as drawn, 99.95+%
Aluminum, wire reel, 1m, diameter 0.02mm, hard, 99.99%
Aluminum, wire reel, 500m, diameter 0.5mm, as drawn, 99.5%
Aluminum, wire reel, 10m, diameter 0.125mm, as drawn, 99.5%
Aluminum, wire reel, 5m, diameter 0.125mm, as drawn, 99.99+%
Aluminum, wire reel, 50m, diameter 0.025mm, as drawn, 99.99+%
Aluminum, wire reel, 20m, diameter 2.0mm, as drawn, 99.999%
Aluminum, wire reel, 1m, diameter 3.0mm, as drawn, 99.999%
Aluminum, wire reel, 500m, diameter 0.25mm, as drawn, 99.95+%
Aluminum, wire reel, 20m, diameter 0.125mm, as drawn, 99.99+%
Aluminum, wire reel, 5m, diameter 0.025mm, as drawn, 99.0+%
Aluminum, wire reel, 200m, diameter 0.25mm, as drawn, 99.95+%
Aluminum, wire reel, 50m, diameter 0.063mm, annealed, 99.99%
Aluminum, wire reel, 20m, diameter 0.25mm, hard, 99.99+%