콘텐츠로 건너뛰기

What do we know about taper corrosion in total hip arthroplasty?

What do we know about taper corrosion in total hip arthroplasty?

The Journal of arthroplasty (2014-03-25)

J J Jacobs, H J Cooper, R M Urban, R L Wixson, C J Della Valle

초록

Mechanically assisted crevice corrosion (MACC) at metal/metal modular junctions in which at least one of the components is fabricated from cobalt-chromium alloy, has reemerged as a potential clinically significant complication in total hip arthroplasty. The clinical manifestation of MACC may include the development of an adverse local tissue reaction (ALTR), similar to what has been described in association with metal-on-metal bearing total hip and resurfacing arthroplasty. The clinical presentation of MACC-associated ALTRs may include pain and possibly late recurrent dislocations. Abnormal metal artifact reduction sequence magnetic resonance images and elevated serum metal levels (cobalt elevations out of proportion to chromium elevations) can be helpful in the diagnosis of these MACC-associated ALTRs.

MATERIALS

제품 번호

브랜드

제품 설명

Sigma-Aldrich

Cobalt, Carbon coated magnetic, nanopowder, <50 nm particle size (TEM), ≥99%

Sigma-Aldrich

Chromium, powder, 99.5%, −100 mesh

Sigma-Aldrich

Cobalt, powder, 2 μm particle size, 99.8% trace metals basis

Sigma-Aldrich

Cobalt, powder, <150 μm, ≥99.9% trace metals basis

Sigma-Aldrich

Cobalt, foil, thickness 1.0 mm, 99.95% trace metals basis

Sigma-Aldrich

Cobalt, foil, thickness 0.1 mm, 99.95% trace metals basis

Sigma-Aldrich

Cobalt, rod, diam. 5.0 mm, 99.95% trace metals basis

Sigma-Aldrich

Cobalt, foil, thickness 0.1 mm, ≥99.99%

Sigma-Aldrich

Cobalt, pieces, 99.5% trace metals basis

Sigma-Aldrich

Cobalt, wire, diam. 1.0 mm, 99.995% trace metals basis

Sigma-Aldrich

Chromium, chips, 99.995% trace metals basis

Sigma-Aldrich

Chromium, chips, thickness ~2 mm, 99.5%

Sigma-Aldrich

Cobalt, granular, 99.99% trace metals basis

Sigma-Aldrich

Chromium, powder, ≥99% trace metals basis, <45 μm

Cobalt, foil, 8mm disks, thickness 0.009mm, 99.9%

Cobalt, foil, not light tested, 50x50mm, thickness 0.002mm, temporary acrylic support, 99.9%

Cobalt, foil, 8mm disks, thickness 0.01mm, 99.9%

Cobalt, foil, light tested, 25x25mm, thickness 0.009mm, 99.9%

Cobalt, foil, 6mm disks, thickness 0.125mm, as rolled, 99.99+%

Cobalt, foil, 8mm disks, thickness 0.005mm, 99.9%

Cobalt, foil, 8mm disks, thickness 0.0125mm, 99.9%

Cobalt, foil, 6mm disks, thickness 0.25mm, as rolled, 99.9%

Cobalt, foil, not light tested, 25x25mm, thickness 0.005mm, 99.9%

Cobalt, foil, 8mm disks, thickness 0.015mm, 99.9%

Cobalt, foil, 8mm disks, thickness 0.125mm, annealed, 99.9%

Cobalt, foil, not light tested, 50x50mm, thickness 0.006mm, 99.9%

Cobalt, microfoil, disks, 10mm, thinness 0.5μm, specific density 434μg/cm², permanent mylar 3.5μm support, 99.9%

Cobalt, foil, not light tested, 50x50mm, thickness 0.007mm, 99.9%

Cobalt, foil, not light tested, 150x150mm, thickness 0.0125mm, 99.9%

Cobalt, wire reel, 0.1m, diameter 1.0mm, hard, 99.99+%