Reactive processing of recycled polycarbonate/acrylonitrile butadiene styrene.

Cellular phone housings were ground to make original particulates using a knife mill. Foams and adhesives with a lighter density than water were removed from ground mixtures using a sink-float process in water; ground metals, button rubbers, and wires were separated from desired materials by using a sink float process in salt All housing materials, consisting of seven thermoplastics included in cellular phone housings, showed better tensile properties than pure housing materials made of polycarbonate/acrylonitrile butadiene styrene, but they only had about half of the impact strength. In contrast, the low impact strength for all housing materials was improved by adding 25 wt % polyethylene elastomer and/or 2.4 wt % ground epoxy circuit boards for batch mixing. Impact strengths, tensile strengths, and the energy absorption ability of all housing materials were improved by adding 5.4wt% glycidyl methacrylate for twin screw extrusion.