2637501

Inlet Liner, Direct (SPME) Type, Straight Design (unpacked)

pkg of 1 ea

• UNSPSC 코드: 12000000

속성

• 포장: pkg of 1 ea
• 길이 × O.D. × I.D.: 78.5 mm × 6.5 mm × 0.75 mm

설명

일반 설명

The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a glass tube between the septum and the column, where the sample is evaporated and brought into the gas phase. Split/splitless inlet allows fast sample introduction and vaporization which is highly advantageous for small sample sizes. Though the injection modes for both split and splitless are carried out on the same inlet, there are certain differences like a splitless injection involves the complete introduction of the sample into the column whereas in a split injection, the sample is divided in the inlet as a result only part of the sample is introduced in the column.

Deactivated (silanized) glass inlet liner for capillary injection ports.

• Fits Agilent (5890, 6890, and 7890)
• Fits Finnigan (9001GCQ)
• Fits Varian (CP-1177 Injector)

안전성 정보

• Storage Class Code: 13 - Non Combustible Solids
• WGK: WGK 3
• Flash Point (°F): Not applicable
• Flash Point (°C): Not applicable