21567-U

Supelite DAX-8

jar of 1000 g

• 동의어(들): XAD-8
• UNSPSC 코드: 23151817
• NACRES: SB.52

속성

• 형태: solid
• 포장: jar of 1000 g
• 기술: HPLC: suitable; LPLC: suitable; ion chromatography: suitable
• 표면적: 140 m²/g
• 기질: acrylic ester
• 기질 활성군: polymer
• 입자 크기: 40-60 mesh
• 공극 크기: ~0.79 mL/g pore volume; 225 Å mean pore size
• density: 1.09 g/mL at 25 °C (true wet)(lit.); 1.23 g/mL at 25 °C (skeletal)(lit.)
• 분리 기술: reversed phase

설명

일반 설명

Supelite DAX-8 is a nonfunctionalised resin with strong hydrophobic organic matter endorsed to humic and fulvic acids. It is also referred as polymethylmethacrylate resin.

애플리케이션

Supelite DAX-8 was used as an absorbent in:

• HPLC-SEC fractionation system
• column chromatography.
• extraction procedure and these extracts were analysed using Cary Eclipse fluorescence spectrophotometer

Adsorbent resin with moderate polarity for compounds up to 150,000 MW. Most commonly used for adsorption of fulvic and humic acids, treatment of paper pulp mill waste, and removal of alcohols, surfactants, and colorants from samples.

제조 메모

DAX-8 is a salt imbibed resin, which requires some preparation prior to use. In the protocol below, you may use methanol in place of ethanol.

• First, rinse the adsorbent resin with 2-3 bed volumes (BV) of distilled water.
• Soak overnight in 2 BV of 95% ethanol.
• After soaking, the resin is introduced into the column and rinsed with an additional 2 BV of 95% ethanol.
• Rinse with 2 BV of distilled water to displace the ethanol, followed by 1 BV of 4% (w/v) sodium hydroxide, 2 BV of distilled water, 1 BV 4% (v/v) hydrochloric acid, and finally by distilled water until the pH of the eluent becomes neutral.

법적 정보

안전성 정보

• Storage Class Code: 11 - Combustible Solids
• WGK: WGK 3
• Flash Point (°F): Not applicable
• Flash Point (°C): Not applicable
• 개인 보호 장비: Eyeshields, Gloves, type N95 (US)