Skip to Content
Merck
  • Accurate analysis of formose reaction products by LC-UV: an analytical challenge.

Accurate analysis of formose reaction products by LC-UV: an analytical challenge.

Journal of chromatographic science (2013-02-05)
Thomas Zweckmair, Stefan Böhmdorfer, Anna Bogolitsyna, Thomas Rosenau, Antje Potthast, Senad Novalin
ABSTRACT

This study presents a liquid chromatography-ultraviolet (LC-UV) method for the accurate analysis of formose reaction products with regard to sum parameters. Limitations encountered in gas chromatography (e.g., thermal stability of analytes) were overcome. First, alditols are O-benzoylated and subjected to reversed-phase chromatography. They are then detected by UV and by electrospray ionization-mass spectrometry (ESI-MS) for validation purposes. Compared with standard 2,4-dinitrophenylhydrazine labeling, the accuracy of results from LC-UV is dramatically improved due to enhanced chromatographic resolution and validation by ESI-MS. For the first time ever, LC-UV may be used to accurately quantify 2-hydroxymethylglycerol, a branched chain alditol, D,L-glyceraldehyde, D,L-galactose, which represents the group of D,L-iditol/galactose/glucose/mannose and D,L-erythrose in formose reaction products.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Ethanol, JIS first grade, 94.8-95.8%
Sigma-Aldrich
Sodium hydroxide solution, 0.1 M
Sigma-Aldrich
Sodium hydroxide solution, 4 M
Sigma-Aldrich
Acetic acid, ≥99.7%, SAJ super special grade
Sigma-Aldrich
Sulfuric acid, SAJ first grade, ≥95.0%
Sigma-Aldrich
Sulfuric acid solution, 70%
Sigma-Aldrich
Acetic acid, 99.5-100.0%
Sigma-Aldrich
Sulfuric acid solution, 0.1 M
Sigma-Aldrich
Sodium hydroxide solution, 7 M
Sigma-Aldrich
Methanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Acetic acid, ≥99.7%, for titration in non-aqueous medium
Sigma-Aldrich
Sulfuric acid solution, 0.05 M
Sigma-Aldrich
Sulfuric acid solution, 5 mM
Sigma-Aldrich
Acetic acid, SAJ first grade, ≥99.0%
Sigma-Aldrich
Sodium hydroxide solution, 6 M
Sigma-Aldrich
Methanol, JIS 300, ≥99.8%, for residue analysis
Sigma-Aldrich
Acetic acid, JIS special grade, ≥99.7%
Sigma-Aldrich
Acetic acid solution, 1 M, 1 N
Sigma-Aldrich
Sulfuric acid solution, 0.025 M
Sigma-Aldrich
Sulfuric acid solution, 0.5 M
Sigma-Aldrich
Acetic acid, ≥99.7%
Sigma-Aldrich
Sulfuric acid solution, SAJ first grade, 32.2-36.8% in H2O
Sigma-Aldrich
Sodium hydroxide solution, 2 M
Sigma-Aldrich
Sulfuric acid solution, 0.0125 M
Sigma-Aldrich
Acetic acid solution, SAJ first grade, 27.0-33.0%
Sigma-Aldrich
Sodium hydroxide solution, 0.01 M
Sigma-Aldrich
Sodium hydroxide solution, 1 M
Sigma-Aldrich
Sodium hydroxide solution, 0.05 M
Sigma-Aldrich
Sodium hydroxide solution, 0.02 M
Sigma-Aldrich
Methanol, SAJ special grade