- Molar uprighting by a nickel-titanium spring based on a setup model.
Molar uprighting by a nickel-titanium spring based on a setup model.
American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics (2014-07-01)
MoonHee Kim, Minji Kim, Youn-Sic Chun
PMID24975006
ABSTRACT
Molar uprighting is an important adjunctive treatment in orthodontics: repositioning the tilted molar eliminates the potentially pathologic condition and simplifies the ultimate restorative procedure. Although various methods for molar uprighting have been applied successfully, they still have some limitations and disadvantages in tooth movement. This article reports on a new clinical technique for molar uprighting with nickel-titanium springs based on a setup model. Two patients treated with this system are shown.
MATERIALS
Product Number
Brand
Product Description
Nickel, foil, light tested, 100x100mm, thickness 0.007mm, 99.95%
Titanium, rod, 200mm, diameter 25mm, annealed, 99.6+%
Nickel, foil, not light tested, 100x100mm, thickness 0.002mm, 99.95%
Nickel, foil, not light tested, 100x100mm, thickness 0.004mm, hard, 99%
Nickel, foil, 50x50mm, thickness 0.5mm, as rolled, 99.99+%
Nickel, foil, 300x300mm, thickness 0.125mm, annealed, 99%
Nickel, foil, 0.5m coil, thickness 0.025mm, annealed, 99%
Nickel, foil, 50x50mm, thickness 1.0mm, as rolled, 99.999%
Nickel, foil, light tested, 50x50mm, thickness 0.05mm, 99.9%
Nickel, mesh, 30x30mm, nominal aperture 0.34mm, thickness 0.025mm, wire diameter 0.041mm, 70 wires/inch, open area 80%, electro-formed mesh, 99.9%
Nickel, foil, light tested, 300x300mm, thickness 0.03mm, 99.9%
Titanium, tube, 200mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%
Titanium, tube, 100mm, outside diameter 1.05mm, inside diameter 0.75mm, wall thickness 0.15mm, annealed, 99.6+%
Nickel, foil, 2m coil, thickness 0.125mm, coil width 50mm, annealed, 99%
Nickel, foil, 50x50mm, thickness 0.25mm, annealed, 99%
Nickel, foil, 25x25mm, thickness 0.5mm, as rolled, 99.99+%
Nickel, foil, 25x25mm, thickness 1.0mm, annealed, 99.98%
Titanium, rod, 500mm, diameter 1.5mm, annealed, 99.6+%
Titanium, rod, 25mm, diameter 50mm, 99.99+%
Nickel, foil, 25x25mm, thickness 0.125mm, annealed, 99%
Nickel, foil, 0.5m coil, thickness 0.075mm, as rolled, 99.98%
Nickel, wire reel, 10m, diameter 0.4mm, as drawn, 99%
Nickel, wire reel, 10m, diameter 0.25mm, annealed, 99%
Nickel, foil, 4mm disks, thickness 0.025mm, as rolled, 100%
Nickel, mesh, 130x130mm, nominal aperture 0.34mm, thickness 0.025mm, wire diameter 0.041mm, 70 wires/inch, open area 80%, electro-formed mesh, 99.9%
Nickel, foil, 0.5m coil, thickness 0.025mm, coil width 600mm, as rolled, 99%
Titanium, tube, 200mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%
Nickel, foil, 4mm disks, thickness 0.025mm, 99.9%
Nickel, wire reel, 0.5m, diameter 1.0mm, as drawn, 99.99+%
Nickel, foil, 2m coil, thickness 0.50mm, annealed, 99%