Skip to Content
Merck

The molybdenum cofactor.

The Journal of biological chemistry (2013-03-30)
Ralf R Mendel
ABSTRACT

The transition element molybdenum needs to be complexed by a special cofactor to gain catalytic activity. Molybdenum is bound to a unique pterin, thus forming the molybdenum cofactor (Moco), which, in different variants, is the active compound at the catalytic site of all molybdenum-containing enzymes in nature, except bacterial molybdenum nitrogenase. The biosynthesis of Moco involves the complex interaction of six proteins and is a process of four steps, which also require iron, ATP, and copper. After its synthesis, Moco is distributed, involving Moco-binding proteins. A deficiency in the biosynthesis of Moco has lethal consequences for the respective organisms.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Molybdenum, powder, 10 μm, ≥99.95% trace metals basis
Sigma-Aldrich
Molybdenum, powder, <150 μm, 99.9% trace metals basis
Sigma-Aldrich
Molybdenum, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Molybdenum, foil, thickness 0.025 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Molybdenum, nanopowder, <100 nm particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
Molybdenum, foil, thickness 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Molybdenum, powder, 1-5 μm, ≥99.9% trace metals basis
Sigma-Aldrich
Molybdenum, powder, <150 μm, 99.99% trace metals basis
Molybdenum, rod, 100mm, diameter 6.0mm, centerless ground, 99.9%
Molybdenum, microfoil, disks, 10mm, thinness 0.1μm, specific density 92.4μg/cm2, permanent mylar 3.5μm support, 99.9%
Molybdenum, wire reel, 10m, diameter 0.01mm, hard, 99.8+%
Molybdenum, wire reel, 1000m, diameter 0.03mm, hard, 99.95%
Molybdenum, foil, not light tested, 150x150mm, thickness 0.05mm, annealed, 99.9%
Molybdenum, rod, 1000mm, diameter 6.0mm, centerless ground, 99.9%
Molybdenum, insulated wire, 20m, conductor diameter 0.125mm, insulation thickness 0.012mm, polyimide insulation, 99.95%
Molybdenum, foil, light tested, 50x50mm, thickness 0.006mm, 99.9%
Molybdenum, mesh, 150x150mm, nominal aperture 0.44mm, wire diameter 0.07mm, 50 wires/inch, open area 67%, plain weave mesh
Molybdenum, rod, 100mm, diameter 8.0mm, centerless ground, 99.9%
Molybdenum, tube, 200mm, outside diameter 3.15mm, inside diameter 2.39mm, wall thickness 0.38mm, 99.9%
Molybdenum, foil, 100x100mm, thickness 0.5mm, polished on both sides, 99.9%
Molybdenum, wire reel, 1000m, diameter 0.05mm, annealed, 99.95%
Molybdenum, tube, 1000mm, outside diameter 3.15mm, inside diameter 2.39mm, wall thickness 0.38mm, 99.9%
Molybdenum, rod, 1000mm, diameter 8.0mm, centerless ground, 99.9%
Molybdenum, wire reel, 100m, diameter 0.2mm, as drawn, 99.95%
Molybdenum, foil, light tested, 29x200mm, thickness 0.0712mm, annealed, 99.9%
Molybdenum, rod, 500mm, diameter 1.25mm, centerless ground, 99.9%
Molybdenum, tube, 100mm, outside diameter 6.0mm, inside diameter 5.6mm, wall thickness 0.20mm, 99.9%
Molybdenum, foil, light tested, 50x50mm, thickness 0.009mm, 99.9%
Molybdenum, foil, light tested, 50x50mm, thickness 0.075mm, annealed, 99.9%
Molybdenum, foil, not light tested, 50x50mm, thickness 0.009mm, 99.9%