Modified Fenton oxidation of diesel fuel in arctic soils rich in organic matter and iron.

Modified Fenton oxidation of diesel fuel in arctic soils rich in organic matter and iron.

Chemosphere (2014-07-30)

Mary K Sherwood, Daniel P Cassidy

ABSTRACT

Modified Fenton (MF) chemistry was tested in the laboratory to treat three diesel fuel-contaminated soils from the Canadian arctic rich in soil organic matter (SOM) and Fe oxides. Reactors were dosed with hydrogen peroxide (HP), and treatment was compared in reactors with SOM as the only chelate vs. reactors to which ethylenediaminetetraacetate (EDTA) was added. Concentrations of diesel fuel and HP were measured over time, and the oxidation of both diesel fuel and SOM were quantified in each soil. A distinct selectivity for oxidation of diesel fuel over SOM was observed. Reactors with EDTA showed significantly less diesel fuel oxidation and lower oxidant efficiency (diesel fuel oxidized/HP consumed) than reactors with SOM as the only chelate. The results from these studies demonstrate that MF chemistry can be an effective remedial tool for contaminated arctic soils, and challenge the traditional conceptual model that SOM reduces the efficiency of MF treatment through excessive scavenging of oxidant.

MATERIALS

Product Number

Brand

Product Description

356808

Sigma-Aldrich

Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis

267945

Sigma-Aldrich

Iron, chips, 99.98% trace metals basis

44890

Sigma-Aldrich

Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)

03677

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, BioUltra, for molecular biology, ≥99.0% (T)

27285

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, meets analytical specification of Ph. Eur., BP, USP, FCC, 99.0-101.0%

IRMM524B

Iron, IRMM^®, certified reference material, 0.5 mm wire

95321

Supelco

Hydrogen peroxide solution, ≥30%, for trace analysis

18304

Sigma-Aldrich

Hydrogen peroxide solution, 34.5-36.5%

95294

Sigma-Aldrich

Hydrogen peroxide solution, tested according to Ph. Eur.

03685

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, ≥97.0% (KT)

E5134

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, suitable for electrophoresis, for molecular biology, 99.0-101.0% (titration)

ED2SC

Sigma-Aldrich

Ethylenediaminetetraacetic acid calcium disodium salt hydrate

ED2SS

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, reagent grade, 98.5-101.5% (titration)

E4884

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, ACS reagent, 99.0-101.0%

H1009

Sigma-Aldrich

Hydrogen peroxide solution, 30 % (w/w) in H₂O, contains stabilizer

1233009

USP

Edetate disodium, United States Pharmacopeia (USP) Reference Standard

720712

Sigma-Aldrich

Iron(III) oxide, dispersion, nanoparticles, ≤110 nm particle size, 15 wt. % in ethanol

E6635

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, Sigma Grade, suitable for plant cell culture, 98.5-101.5%

E1644

Sigma-Aldrich

Ethylenediaminetetraacetic acid disodium salt dihydrate, 98.5-101.5%, BioUltra

88597

Millipore

Hydrogen peroxide solution, 3%, suitable for microbiology

PHR1068

Supelco

Ethylenediaminetetraacetic acid disodium salt dihydrate, Pharmaceutical Secondary Standard; Certified Reference Material

209309

Sigma-Aldrich

Iron, powder, −325 mesh, 97%

GF18645240

Iron, tube, 100mm, outside diameter 10.0mm, inside diameter 7mm, wall thickness 1.5mm, annealed, 99.5%

GF04889751

Iron, wire reel, 0.2m, diameter 0.5mm, as drawn, 99.998%

GF92236428

Iron, tube, 500mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, annealed, 99.5%

GF31151887

Iron, tube, 200mm, outside diameter 2.0mm, inside diameter 1.6mm, wall thickness 0.2mm, as drawn, 99.5%

GF51245591

Iron, wire reel, 100m, diameter 0.065mm, hard, 99.5%

GF29986981

Iron, foil, 300x300mm, thickness 0.15mm, hard, 99.5%

GF26046299

Iron, tube, 500mm, outside diameter 6.35mm, inside diameter 5.35mm, wall thickness 0.5mm, as drawn, 99.8%

GF82933511

Iron, tube, 1000mm, outside diameter 3.2mm, inside diameter 2.2mm, wall thickness 0.5mm, as drawn, 99.8%