Skip to Content
Merck
  • Optimization of supercritical fluid consecutive extractions of fatty acids and polyphenols from Vitis vinifera grape wastes.

Optimization of supercritical fluid consecutive extractions of fatty acids and polyphenols from Vitis vinifera grape wastes.

Journal of food science (2014-12-05)
Oier Aizpurua-Olaizola, Markel Ormazabal, Asier Vallejo, Maitane Olivares, Patricia Navarro, Nestor Etxebarria, Aresatz Usobiaga
ABSTRACT

In this study, supercritical fluid extraction has been successfully applied to a sequential fractionation of fatty acids and polyphenols from wine wastes (2 different vitis vinifera grapes). To this aim, in a 1st step just fatty acids were extracted and in a 2nd one the polyphenols. The variables that affected to the extraction efficiency were separately optimized in both steps following an experimental design approach. The effect of extraction temperature flow, pressure, and time were thoroughly evaluated for the extraction of fatty acids, whereas the addition of methanol was also considered in the case of the polyphenols extraction. A quantitative extraction with high efficiency was achieved at a very short time and low temperatures. Concerning quantification, fatty acids were determined by means of gas chromatography coupled to mass spectrometry after a derivatization step, whereas the polyphenols were analyzed by means of high performance liquid chromatography coupled to tandem mass spectrometry and the Folin-Ciocalteu method.

MATERIALS
Product Number
Brand
Product Description

Supelco
trans-9-Octadecenoic acid methyl ester, certified reference material, 10 mg/mL in heptane, ampule of 1 mL
USP
Propyl gallate, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
2,2,4-Trimethylpentane, puriss. p.a., ≥99.5% (GC)
Sigma-Aldrich
Formic acid, puriss., meets analytical specifications of DAC, FCC, 98.0-100%
Sigma-Aldrich
Formic acid, reagent grade, ≥95%
Sigma-Aldrich
2,2,4-Trimethylpentane, suitable for HPLC, ≥99%
Sigma-Aldrich
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
Sigma-Aldrich
Propyl gallate, for microscopy, ≥98.0% (HPLC)
Supelco
Methyl cis-11-eicosenoate, analytical standard
Supelco
Methyl heptadecanoate, analytical standard
Sigma-Aldrich
Methyl heptadecanoate, 95%
Supelco
Methyl behenate, analytical standard
Sigma-Aldrich
Methyl linolenate, technical, 70-80% (GC)
Sigma-Aldrich
Methyl laurate, ≥98%, FG
Sigma-Aldrich
Methyl octanoate, 99%
Sigma-Aldrich
Formic acid, ≥95%, FCC, FG
Sigma-Aldrich
Sodium carbonate-12C, 99.9 atom % 12C
Sigma-Aldrich
Methyl octanoate, 99%, FG
Sigma-Aldrich
Methyl oleate, 99%
Sigma-Aldrich
Propyl gallate, ≥98%, FCC
Sigma-Aldrich
Methyl cis-11-eicosenoate, ≥98%
Sigma-Aldrich
Methyl pentadecanoate, ≥98.5%
Sigma-Aldrich
Propyl gallate, powder
Sigma-Aldrich
2,2,4-Trimethylpentane, anhydrous, 99.8%
Supelco
Sulfuric acid concentrate, 0.1 M H2SO4 in water (0.2N), eluent concentrate for IC
Sigma-Aldrich
Methyl oleate, technical grade, 70%
Sigma-Aldrich
Formic acid, ACS reagent, ≥96%
Supelco
Propyl gallate, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Gallic acid, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
2,2,4-Trimethylpentane, ACS reagent, ≥99.0%