Skip to Content
Merck

Application of the Fenton process in the elimination of helminth eggs.

Journal of water and health (2014-12-05)
Sandra Isabel Escobar-Megchún, Hugo Alejandro Nájera-Aguilar, Magaly González-Hilerio, Javier Gutiérrez-Jiménez, Rubén Fernando Gutiérrez-Hernández, María Neftalí Rojas-Valencia
ABSTRACT

This study relates to a method for evaluating the degradation efficiency of Ascaris lumbricoides eggs through a Fenton reaction, using hydrogen peroxide (H2O2) at 100, 250, and 500 mg/L, ferrous sulfate (FeSO4) at 458 mg/L Fe(2+) and pH values of 3, 4.5, and 6. The experiments were conducted according to a 3(2) experimental design, with 1:1, 3:1, and 5:1 (H2O2/Fe(2+)) molar ratios. The oxidation and flocculation stages were performed at 130 rpm during 2 hours and at 25-30 rpm during 20 min, respectively. As a result of the Fenton reaction, an average of 91.2% Ascaris lumbricoides egg degradation was achieved at pH 6 using a 500 mg/L dose of H2O2 and a 3:1 (H2O2/Fe(2+)) molar ratio. Thus, this process is an alternative for eliminating parasites that are resistant to conventional disinfection processes and significantly reduces the human health hazard they represent.

MATERIALS
Product Number
Brand
Product Description

Supelco
Hydrogen peroxide solution, 30 % (w/w), for ultratrace analysis
Sigma-Aldrich
Hydrogen peroxide solution, tested according to Ph. Eur.
Millipore
Hydrogen peroxide solution, 3%, suitable for microbiology
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Hydrogen peroxide solution, contains potassium stannate as inhibitor, 30-32 wt. % in water, semiconductor grade, 99.999% trace metals basis
Sigma-Aldrich
Hydrogen peroxide solution, 34.5-36.5%
Iron, IRMM®, certified reference material, 0.5 mm wire
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Supelco
Hydrogen peroxide solution, ≥30%, for trace analysis
Sigma-Aldrich
Iron(II) sulfate heptahydrate, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Iron(II) sulfate heptahydrate, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99%
Sigma-Aldrich
Hydrogen peroxide solution, 30 % (w/w) in H2O, contains stabilizer
Iron, foil, light tested, 25x25mm, thickness 0.075mm, hard, 99.5%
Iron, foil, light tested, 150x150mm, thickness 0.075mm, hard, 99.5%
Iron, foil, light tested, 50x50mm, thickness 0.025mm, hard, 99.5%
Sigma-Aldrich
Iron(II) sulfate heptahydrate, ACS reagent, ≥99.0%
Sigma-Aldrich
Hydrogen peroxide solution, 50 wt. % in H2O, stabilized
Iron, foil, 300x300mm, thickness 0.1mm, hard, 99.5%
Iron, tube, 1000mm, outside diameter 12.0mm, inside diameter 10mm, wall thickness 1.0mm, annealed, 99.5%
Iron, rod, 50mm, diameter 5.0mm, as drawn, 99.99+%
Iron, foil, 25x25mm, thickness 2mm, as rolled, 99.99+%
Iron, foil, 50x50mm, thickness 0.5mm, hard, 99.5%
Iron, foil, 300x300mm, thickness 0.20mm, hard, 99.5%
Iron, tube, 100mm, outside diameter 10.6mm, inside diameter 10.0mm, wall thickness 0.3mm, as drawn, 99.8+%
Iron, foil, 100x100mm, thickness 0.125mm, hard, 99.5%
Iron, rod, 100mm, diameter 30mm, as drawn, armcO« soft ingot 99.8%
Iron, rod, 50mm, diameter 12.7mm, as drawn, 99.95%
Iron, tube, 500mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, annealed, 99.5%