Photodegradation of non-ionic surfactant with different ethoxy groups in aqueous effluents by the photo-Fenton process.

Photodegradation of non-ionic surfactant with different ethoxy groups in aqueous effluents by the photo-Fenton process.

Environmental technology (2014-04-08)

Syllos S da Silva, Osvaldo Chiavone-Filho, Eduardo L de Barros Neto, Andre L N Mota, Edson L Foletto, Claudio A O Nascimento

PMID24701956

ABSTRACT

The photo-Fenton process was applied to degrade non-ionic surfactants with different numbers of ethoxy groups, seven (E7), ten (E10) and twenty-three (E23). The effects of H2O2 concentration, Fe(II) concentration and number of ethoxy groups on the mineralization of surfactants were investigated. The response surface methodology (RSM) was applied to determine optimal concentrations of Fenton's reagents for each surfactant. The efficiency of the photo-Fenton process reached 95% for all surfactants studied at 45 min in optimal conditions determined in this work. The analysis of results showed that the efficiency depends upon the number of ethoxy groups in the surfactant. The increase in ethoxy groups favoured the mineralization of surfactants. The analysis of variance (ANOVA) was applied, and according to the F-test the models for the mineralization of surfactants were considered significant and predictable. The photo-Fenton process has proven to be feasible for the degradation of ethoxylated surfactants in aqueous solution.

MATERIALS

Product Number

Brand

Product Description

16911

Supelco

Hydrogen peroxide solution, 30 % (w/w), for ultratrace analysis

18304

Sigma-Aldrich

Hydrogen peroxide solution, 34.5-36.5%

95321

Supelco

Hydrogen peroxide solution, ≥30%, for trace analysis

IRMM524B

Iron, IRMM^®, certified reference material, 0.5 mm wire

95294

Sigma-Aldrich

Hydrogen peroxide solution, tested according to Ph. Eur.

316989

Sigma-Aldrich

Hydrogen peroxide solution, contains potassium stannate as inhibitor, 30-32 wt. % in water, semiconductor grade, 99.999% trace metals basis

356808

Sigma-Aldrich

Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis

44890

Sigma-Aldrich

Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)

267945

Sigma-Aldrich

Iron, chips, 99.98% trace metals basis

209309

Sigma-Aldrich

Iron, powder, −325 mesh, 97%

H1009

Sigma-Aldrich

Hydrogen peroxide solution, 30 % (w/w) in H₂O, contains stabilizer

GF86771953

Iron, foil, 1m coil, thickness 0.38mm, hard, 99.5%

88597

Millipore

Hydrogen peroxide solution, 3%, suitable for microbiology

GF93388999

Iron, foil, light tested, 25x25mm, thickness 0.075mm, hard, 99.5%

GF88912952

Iron, rod, 100mm, diameter 2.0mm, as drawn, 99.99+%

H3410

Sigma-Aldrich

Hydrogen peroxide solution, contains inhibitor, 30 wt. % in H₂O, meets USP testing specifications

95299

Sigma-Aldrich

Hydrogen peroxide solution, purum p.a., ≥35% (RT)

323381

Sigma-Aldrich

Hydrogen peroxide solution, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H₂O

349887

Sigma-Aldrich

Hydrogen peroxide solution, contains inhibitor, 35 wt. % in H₂O

216763

Sigma-Aldrich

Hydrogen peroxide solution, contains inhibitor, 30 wt. % in H₂O, ACS reagent

516813

Sigma-Aldrich

Hydrogen peroxide solution, 50 wt. % in H₂O, stabilized

31642

Sigma-Aldrich

Hydrogen Peroxide Solution, 30% (w/w), puriss. p.a., reag. ISO, reag. Ph. Eur.

GF77375672

Iron, foil, 25mm disks, thickness 0.005mm, 99.85%

GF15469151

Iron, foil, 1m coil, thickness 0.1mm, hard, 99.5%

GF43327548

Iron, foil, 50mm disks, thickness 0.05mm, hard, 99.5%

GF58945078

Iron, wire reel, 250m, diameter 0.25mm, hard, 99.5%

GF45478604

Iron, tube, 200mm, outside diameter 6.35mm, inside diameter 5.35mm, wall thickness 0.5mm, as drawn, 99.8%

GF92236428

Iron, tube, 500mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, annealed, 99.5%

GF03053001

Iron, wire reel, 1m, diameter 0.025mm, as drawn, 99.99+%

GF63616473

Iron, foil, 300x300mm, thickness 0.20mm, hard, 99.5%