Saltar al contenido
Merck
  • Real-time monitoring of H2O2 release from single cells using nanoporous gold microelectrodes decorated with platinum nanoparticles.

Real-time monitoring of H2O2 release from single cells using nanoporous gold microelectrodes decorated with platinum nanoparticles.

The Analyst (2015-01-30)
Chong Xiao, Yan-Ling Liu, Jia-Quan Xu, Song-Wei Lv, Shan Guo, Wei-Hua Huang
RESUMEN

Here, we report a self-supported nanoporous gold microelectrode decorated with well-dispersed and tiny platinum nanoparticles as an electrochemical nonenzymatic hydrogen peroxide biosensor. Nanoporous gold was fabricated by electrochemical alloying/dealloying and then small-sized platinum nanoparticles were electrodeposited uniformly on them. This novel hybrid nanostructure endows the sensor with high sensitivity and selectivity towards the reduction of hydrogen peroxide with a low detection limit of 0.3 nM. The sensor has been successfully applied for the measurement of H2O2 release from a single isolated human breast cancer cell, demonstrating its great potential for further physiological and pathological applications.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Forbol 12-miristato 13-acetato, ≥99% (TLC), film or powder
Sigma-Aldrich
PMA, for use in molecular biology applications, ≥99% (HPLC)
Sigma-Aldrich
Ácido sulfúrico, 99.999%
Sigma-Aldrich
Cysteamine hydrochloride, ≥98% (titration)
Sigma-Aldrich
Ácido sulfúrico, SAJ first grade, ≥95.0%
Sigma-Aldrich
Ácido sulfúrico, JIS special grade, ≥95.0%
Sigma-Aldrich
Cysteamine hydrochloride, BioXtra
Sigma-Aldrich
Forbol 12-miristato 13-acetato, synthetic, ≥98.0% (TLC)
Sigma-Aldrich
Ácido cloroplatínico hexahydrate, BioXtra
Sigma-Aldrich
Alcohol bencílico, ≥99%, FCC, FG
Sigma-Aldrich
Alcohol bencílico, anhydrous, 99.8%
Sigma-Aldrich
Sulfuric acid solution, 0.05 M
Sigma-Aldrich
Alcohol bencílico, natural, ≥98%, FG
Sigma-Aldrich
Sulfuric acid solution, 0.5 M
Sigma-Aldrich
Sulfuric acid solution, 0.1 M
Sigma-Aldrich
Sulfuric acid solution, 1.5 M
Sigma-Aldrich
Sulfuric acid solution, 0.01 M
Sigma-Aldrich
Sulfuric acid solution, 5 mM
Sigma-Aldrich
Sulfuric acid solution, 0.025 M
Sigma-Aldrich
Sulfuric acid solution, 0.25 M
Sigma-Aldrich
Alcohol bencílico, SAJ special grade, ≥99.0%
Sigma-Aldrich
Alcohol bencílico, SAJ first grade, ≥98.5%