Saltar al contenido
Merck

[Progress on tantalum rod implanting for the treatment of femur head necrosis].

Zhongguo gu shang = China journal of orthopaedics and traumatology (2013-10-19)
Xiao-kang Tang, Fu-sheng Ye, Pei-jian Tong, Yan-hua Fan, Min Li, Hang Ying, Lu-wei Xiao
RESUMEN

Incorrect treatment for femur head necrosis can cause collapse of femoral head and tresult in severe harm for the patients (especially for the patient with middle-aged and young). The structure and mechanics characteristics of tantalum rod is similar to bone tissue, it higher strength and can adapt the internal environment of organism, so it has a large potency in treating femur head necrosis. Treatment of early femur head necrosis with tantalum rod implanting had alreadly widey applied at home and abroad, the method has the advantages of simple operation, little risk, less complication and beseems the patient with stage I - II of ARCO. But reasons that the difficult diagnosis of early femur head necrosis, localized effect of tantalum rod, different experience of medical worker,caused the contentions about effect of tantalum rod implanting. With development of science, tantalum rod implanting combined with correlative biotechnology should raise the effect in treating femur head necrosis.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Tantalum, powder, −325 mesh, 99.9% trace metals basis
Sigma-Aldrich
Tantalum
Sigma-Aldrich
Tantalum, foil, thickness 0.025 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Tantalum, foil, thickness 0.05 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Tantalum, foil, thickness 0.25 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Tantalum, powder, 60-100 mesh, 99.9%
Tantalum, foil, 50x50mm, thickness 0.5mm, annealed, 99.9%
Sigma-Aldrich
Tantalum, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Tantalum, foil, 100x100mm, thickness 1.0mm, annealed, 99.9%
Tantalum, foil, 100x100mm, thickness 0.25mm, annealed, 99.9%
Sigma-Aldrich
Tantalum, foil, thickness 0.5 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Tantalum, foil, thickness 1.0 mm, ≥99.9% trace metals basis
Tantalum, foil, light tested, 150x150mm, thickness 0.05mm, annealed, 99.9%
Tantalum, foil, 100x100mm, thickness 0.100mm, annealed, 99.9%
Tantalum, mesh, 100x100mm, nominal aperture 0.43mm, wire diameter 0.075mm, 50x50 wires/inch, open area 72%, plain weave mesh
Tantalum, rod, 100mm, diameter 1.0mm, 99.9%
Tantalum, sphere, 100pcs, diameter 1.0mm, precision sphere grade, 99.9%
Tantalum, mesh, 40x40mm, nominal aperture 0.43mm, wire diameter 0.075mm, 50x50 wires/inch, open area 72%, plain weave mesh
Tantalum, tube, 100mm, outside diameter 7.0mm, inside diameter 6.7mm, wall thickness 0.15mm, as drawn, 99.9%
Tantalum, pellets, 50g, max. size 10mm, 99.9%
Tantalum, foil, 100x100mm, thickness 0.125mm, annealed, 99.9%
Tantalum, foil, 50x50mm, thickness 6.0mm, 99.9%
Tantalum, foil, 150x150mm, thickness 0.100mm, annealed, 99.9%
Tantalum, wire reel, 1m, diameter 0.8mm, annealed, 99.9%
Tantalum, foil, light tested, 100x100mm, thickness 0.025mm, as rolled, 99.9%
Tantalum, rod, 200mm, diameter 1.0mm, 99.9%
Tantalum, rod, 200mm, diameter 1.7mm, annealed, 99.9%
Tantalum, tube, 1000mm, outside diameter 3.1mm, inside diameter 2.6mm, wall thickness 0.25mm, as drawn, 99.9%
Tantalum, foil, light tested, 100x100mm, thickness 0.05mm, annealed, 99.9%
Tantalum, pellets, 20g, max. size 10mm, 99.9%