Saltar al contenido
Merck

Four-fold channels are involved in iron diffusion into the inner cavity of plant ferritin.

Biochemistry (2014-04-01)
Chenyan Lv, Shengli Zhang, Jiachen Zang, Guanghua Zhao, Chuanshan Xu
RESUMEN

From an evolutionary point of view, plant and animal ferritins arose from a common ancestor, but plant ferritin exhibits different features as compared with the animal analogue. One major difference is that the 4-fold channels naturally occurring in plant ferritin are hydrophilic, whereas the 4-fold channels in animal ferritin are hydrophobic. Prior to this study, however, the function of the 4-fold channels in oxidative deposition of iron in phytoferritin remained unknown. To elucidate the role of the 4-fold channels in iron oxidative deposition in ferritin, three mutants of recombinant soybean seed H-2 ferritin (rH-2) were prepared by site-directed mutagenesis, which contained H193A/H197A, a 4-fold channel mutant, E165I/E167A/E171A, a 3-fold channel mutant, and E165I/E167A/E171A/H193A/H197A, where both 3- and 4-channels were mutated. Stopped-flow, electrode oximetry, and transmission electron microscopy (TEM) results showed that H193A/H197A and E165I/E167A/E171A exhibited a similar catalyzing activity of iron oxidation with each other, but a pronounced low activity compared to rH-2, demonstrating that both the 4-fold and 3-fold hydrophilic channels are necessary for iron diffusion in ferritin, followed by oxidation. Indeed, among all tested ferritin, the catalyzing activity of E165I/E167A/E171A/H193A/H197A was weakest because its 3- and 4- fold channels were blocked. These findings advance our understanding of the function of 4-fold channels of plant ferritin and the relationship of the structure and function of ferritin.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Iron, ≥99%, reduced, powder (fine)
Sigma-Aldrich
Ferritin from equine spleen, Type I, saline solution
Sigma-Aldrich
Carbonyl iron, ≥97% Fe basis
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Iron, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Sigma-Aldrich
Iron, powder, <10 μm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Sigma-Aldrich
Iron, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Ferritin from human liver, Type IV, 10 μg/mL
Sigma-Aldrich
Iron, nanopowder, 35-45 nm particle size, 99.5% trace metals basis
Iron, foil, 100x100mm, thickness 0.25mm, hard, 99.5%
Sigma-Aldrich
Iron, foil, thickness 0.25 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Ferritin from human spleen, Type V, 10 μg/mL in 0.15 M NaCl, 10 mM Tris, pH 8.0, containing 0.1% sodium azide
Iron, wire reel, 0.5m, diameter 1.0mm, as drawn, 99.99+%
Iron, foil, 100x100mm, thickness 0.125mm, as rolled, 99.99+%
Iron, foil, 300x300mm, thickness 0.1mm, hard, 99.5%
Iron, tube, 200mm, outside diameter 8.0mm, inside diameter 5mm, wall thickness 1.5mm, annealed, 99.5%
Iron, rod, 200mm, diameter 25mm, as drawn, 98+%
Iron, rod, 100mm, diameter 100mm, as drawn, armcO« soft ingot 99.8%
Iron, foil, 100x100mm, thickness 0.5mm, hard, 99.5%
Iron, rod, 50mm, diameter 5.0mm, as drawn, 99.99+%
Iron, rod, 150mm, diameter 6.0mm, as drawn, 99.99+%
Iron, foil, 150x150mm, thickness 1.5mm, as rolled, 99.5%
Iron, foil, 100x100mm, thickness 1.0mm, as rolled, 99.5%
Iron, foil, 300x300mm, thickness 0.20mm, hard, 99.5%
Iron, rod, 100mm, diameter 2.0mm, as drawn, 99.95%
Iron, foil, 25x25mm, thickness 1.0mm, as rolled, 99.5%
Iron, foil, 50x50mm, thickness 0.1mm, hard, 99.5%