Saltar al contenido
Merck

Degradation of phenol by using magnetic photocatalysts of titania.

Water science and technology : a journal of the International Association on Water Pollution Research (2013-04-05)
Chiung-Fen Chang, I-Peng Tseng
RESUMEN

Magnetic TiO2 (MT) composites were prepared and applied to degrading phenol, which is one of the listed priority pollutants. The effects of heat treatment under preparation on the photocatalytic activity of MT composites have been investigated by varying the soaking time under a constant final temperature of 823 K. The total organic carbon and ring-remaining intermediates of o-DHB, p-DHB and 1,4-BQ in solution were detected during the photodegradation of phenol. All the resulting MT composites were the single-phase anatase and magnetite judged by X-ray diffraction patterns. The calcination of the as-prepared particles was proven to be extremely crucial to the photocatalytic activity. The best condition of heat treatment was found to be soaking time of 2 h at T = 823 K due to the good performance of photocatalytic activity, stable magnetic property, and reusability over three times. The results lead to the conclusion that recyclable MT composites prepared in this study, which belonged to the category of recyclable green materials, exhibit good photocatalytic activity to degrade phenol so as to possess applicable potential for the degradation of refractory organics in the aqueous solution. Furthermore, the environmental and health impacts were reduced as MT composites were applied in the treatment of water pollution.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Fenol solution, BioReagent, Equilibrated with 10 mM Tris HCl, pH 8.0, 1 mM EDTA, for molecular biology
Sigma-Aldrich
Fenol solution, BioReagent, Saturated with 0.01 M citrate buffer, pH 4.3 ± 0.2, for molecular biology
Sigma-Aldrich
Fenol, ≥99%
Sigma-Aldrich
Fenol, puriss. p.a., ACS reagent, reag. Ph. Eur., 99.0-100.5%
Sigma-Aldrich
Fenol solution, ≥89.0%
Supelco
Fenol solution, certified reference material, 500 μg/mL in methanol
Sigma-Aldrich
Fenol, BioUltra, for molecular biology, TE-saturated, ~73% (T)
Sigma-Aldrich
Fenol, for molecular biology
Supelco
Fenol solution, 5000 μg/mL in methanol, certified reference material
Sigma-Aldrich
Fenol, SAJ first grade, ≥98.0%
Supelco
Fenol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Fenol, puriss., ≥99.5% (GC), meets analytical specification of Ph. Eur., BP, USP, crystalline (detached)
Sigma-Aldrich
Fenol, contains hypophosphorous as stabilizer, loose crystals, ACS reagent, ≥99.0%
Sigma-Aldrich
Fenol, BioXtra, ≥99.5% (GC)
Sigma-Aldrich
Fenol, unstabilized, ReagentPlus®, ≥99%
Sigma-Aldrich
Fenol solution, 100 mg/dL, standard
Supelco
Fenol, PESTANAL®, analytical standard
Sigma-Aldrich
Fenol, ≥96.0% (calc. on dry substance, T)
Sigma-Aldrich
Fenol, puriss., meets analytical specification of Ph. Eur., BP, USP, 99.5-100.5% (GC)
Sigma-Aldrich
Fenol, unstabilized, purified by redistillation, ≥99%
Sigma-Aldrich
Fenol, JIS special grade, ≥99.0%
Sigma-Aldrich
Fenol, ≥99.0%
Sigma-Aldrich
Fenol solution
Supelco
Fenol solution, 100 μg/mL in acetonitrile, PESTANAL®, analytical standard
Sigma-Aldrich
Fenol, BioUltra, for molecular biology, ≥99.5% (GC)
Sigma-Aldrich
Fenol, ≥99.0%