Skip to Content
Merck
  • Individualizing oral busulfan dose after using a test dose in patients undergoing hematopoietic stem cell transplantation: pharmacokinetic characterization.

Individualizing oral busulfan dose after using a test dose in patients undergoing hematopoietic stem cell transplantation: pharmacokinetic characterization.

Therapeutic drug monitoring (2015-01-15)
Cristiane Effting, Adriano de Moraes Arantes, Luciana V Queiroz Labre, Wilsione J Carneiro, Jerônimo R de Oliveira Neto, César Bariani, Caroline R Rodrigues, Andryne R Rodrigues, Luiz C Cunha
ABSTRACT

Busulfan is an alkylating agent used for conditioning patients undergoing hematopoietic stem cell transplantation with a narrow therapeutic range and highly variable pharmacokinetics. High concentrations induce toxicity, especially hepatic veno-occlusive disease, also referred to as sinusoidal obstruction syndrome. This study aimed to assess busulfan pharmacokinetic variability in pretransplant conditioning regimens using an analytical method validated by high-performance liquid chromatography coupled to diode array detector (HPLC/PDA). Eight patients who used the test dose (TD) of 1 mg/kg busulfan 10 days before conditioning were included, and 10 serial blood samples were collected to determine: the elimination half-life (t1/2), total area under the curve (AUCT), total clearance (Cl(T)/F), and plasma concentration at steady state (C(ss)), using a monocompartmental model and first-order kinetics. The instrumental conditions were: HPLC/PDA Shimadzu, column ACE C18 (150 mm × 4 mm); methanol/water/acetonitrile (65:20:15) eluent flow rate of 1 mL/min; 1,6-bis-(methanesulfonyloxy)-hexane; UV λ = 276 nm; analysis time 17 minutes; and derivatization with sodium diethylcarbamate. The dose was adjusted, and 4 blood samples per day were collected at days 2, 3, and 4 of treatment for new plasma determinations. Four patients needed higher doses; the mean dose administered was 1.02 ± 0.19 mg/kg. Mean results at TD: t1/2 = 2.88 ± 0.5 hours; Cl(T)/F = 0.18 ± 0.03 L · h(-1) · kg(-1); AUC(T) = 5461.00 ± 961.15 ng · mL(-1) · h(-1); and C(ss) = 911.3 ± 159.8 ng/mL. Mean results of samples collected during conditioning: t1/2 = 3.21 ± 0.9 hours; Cl(T)/F = 0.13 ± 0.02 L · h(-1) · kg(-1); AUC(T) = 7571 ± 1705 ng · mL(-1) · h(-1); and C(ss) = 1262.0 ± 284.3 ng/mL. High variability in the assessed pharmacokinetic parameters was observed, with a 38% variation in C(ss) between TD and conditioning regimen; Cl(T)/F decreased by 30%, suggesting drug accumulation after multiple-dose regimen. Although being lower than reported in the literature, this variation may be associated with toxicity of the proposed treatment, justifying patient monitoring and enhancing validity of previous pharmacokinetic evaluation using TD regimen.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, JIS 300, ≥99.8%, for residue analysis
Sigma-Aldrich
Methanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Methanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Methanol, SAJ special grade
Sigma-Aldrich
Methanol, suitable for HPLC
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Methanol, NMR reference standard
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%, poly-coated bottles
Supelco
Methanol, analytical standard
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, 99.93%
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (v/v) trifluoroacetic acid
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Dimenhydrinate
USP
Meropenem, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Acetonitrile solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Dimenhydrinate, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Methanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Methanol, Absolute - Acetone free
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Supelco
Residual Solvent - Acetonitrile, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%