Skip to Content

Functionalized bio-artifact fabricated via selective slurry extrusion. Part 2: Fabrication of ceramic dental crown.

Functionalized bio-artifact fabricated via selective slurry extrusion. Part 2: Fabrication of ceramic dental crown.

Journal of nanoscience and nanotechnology (2014-04-17)

D B Zhu, J P Liang, Y X Qu, G L Duan

ABSTRACT

Functionalized ceramic dental crown was successfully fabricated through selective slurry extrusion (SSE) based technique of solid freeform fabrication (also known as rapid prototyping). After sintering, the decomposed tourmaline powders were embedded in ZrO2 matrix. The far infrared emission properties of the ceramic dental crown were improved due to the increase of the numbers of infrared active bonds from tourmaline. This new dental restoration process presents potential to provide dental patients with functionalized artificial teeth, which benefits the body health by the way of emitting far infrared rays in ambient temperatures.

MATERIALS

Product Number

Brand

Product Description

Sigma-Aldrich

Zirconium, rod, diam. 6.35 mm, ≥99% trace metals basis

Sigma-Aldrich

Zirconium, sponge, ≥99% trace metals basis

Sigma-Aldrich

Zirconium, powder, −100 mesh

Sigma-Aldrich

Zirconium, foil, thickness 0.1 mm, 99.98% trace metals basis

Zirconium, foil, light tested, 100x100mm, thickness 0.0125mm, 99.2%

Zirconium, foil, 8mm disks, thickness 0.009mm, 99.2%

Zirconium, foil, not light tested, 100x100mm, thickness 0.004mm, 99.2%

Zirconium, foil, not light tested, 25x25mm, thickness 0.005mm, 99.2%

Zirconium, foil, not light tested, 50x50mm, thickness 0.006mm, 99.2%

Zirconium, tube, 500mm, outside diameter 6.35mm, inside diameter 4.55mm, wall thickness 0.9mm, annealed, 99.2%

Zirconium, sponge, 500g, max. size 25mm, 99.2%

Zirconium, rod, 200mm, diameter 1.5mm, 99.2%

Zirconium, rod, 1000mm, diameter 9.5mm, centerless ground, 99.2%

Zirconium, wire reel, 1m, diameter 0.125mm, stress relieved, 99.2%

Zirconium, tube, 200mm, outside diameter 1.6mm, inside diameter 1.1mm, wall thickness 0.25mm, hard, 99.2%

Zirconium, rod, 500mm, diameter 2.0mm, centerless ground, 99.2%

Zirconium, wire reel, 0.5m, diameter 0.05mm, as drawn, 99.2%

Zirconium, rod, 200mm, diameter 12.7mm, centerless ground, 99.2%

Zirconium, sponge, 50g, max. size 25mm, 99.2%

Zirconium, wire reel, 5m, diameter 0.5mm, as drawn, 99.2%

Zirconium, rod, 1000mm, diameter 1.5mm, 99.2%

Zirconium, rod, 100mm, diameter 1.5mm, 99.2%

Zirconium, wire reel, 1m, diameter 0.25mm, as drawn, 99.2%

Zirconium, rod, 500mm, diameter 3.0mm, centerless ground, 99.2%

Zirconium, wire reel, 5m, diameter 0.05mm, as drawn, 99.2%

Zirconium, wire reel, 0.5m, diameter 0.5mm, as drawn, 99.2%

Zirconium, wire reel, 1m, diameter 0.28mm, annealed, 99.2%

Zirconium, tube, 200mm, outside diameter 12.7mm, inside diameter 9.5mm, wall thickness 1.6mm, annealed, 99.2%

Zirconium, rod, 500mm, diameter 5.0mm, centerless ground, 99.2%

Zirconium, rod, 200mm, diameter 2.0mm, centerless ground, 99.2%