Saltar al contenido
Merck

In vitro degradability, bioactivity and cell responses to mesoporous magnesium silicate for the induction of bone regeneration.

Colloids and surfaces. B, Biointerfaces (2014-06-07)
Zhaoying Wu, Tingting Tang, Han Guo, Songchao Tang, Yunfei Niu, Jue Zhang, Wenjing Zhang, Rui Ma, Jiacan Su, Changsheng Liu, Jie Wei
RESUMEN

Mesoporous magnesium silicate (m-MS) was synthesized, and the in vitro degradability, bioactivity and primary cell responses to m-MS were investigated. The results suggested that the m-MS with mesoporous channels of approximately 5nm possessed the high specific surface area of 451.0m(2)/g and a large specific pore volume of 0.41cm(3)/g compared with magnesium silicate (MS) without mesopores of 75m(2)/g and 0.21cm(3)/g, respectively. The m-MS was able to absorb a large number of water, with water absorption of 74% compared with 26% for MS. The m-MS was also degradable in a Tris-HCl solution, with a weight loss ratio of 40wt% after a 70-day immersion period. The m-MS exhibited good in vitro bioactivity, inducing apatite formation on its surfaces after soaking in simulated body fluid (SBF) at a faster rate than observed for MS. The m-MS surface clearly promoted the proliferation and differentiation of MC3T3-E1 cells, and their normal cell morphology indicated excellent cytocompatibility. This study suggested that mesoporous magnesium silicate with a high specific surface area and pore volume had suitable degradability and good bioactivity and biocompatibility, making it an excellent candidate biomaterial for the induction of bone regeneration.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Dimetilsulfóxido, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
Sigma-Aldrich
Dimetilsulfóxido, ACS reagent, ≥99.9%
Sigma-Aldrich
Dimetilsulfóxido, for molecular biology
Sigma-Aldrich
Dimetilsulfóxido, suitable for HPLC, ≥99.7%
Sigma-Aldrich
Dimetilsulfóxido, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
Sigma-Aldrich
Dimetilsulfóxido, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Dimetilsulfóxido, ≥99.5% (GC), suitable for plant cell culture
Sigma-Aldrich
DAPI, for nucleic acid staining
Sigma-Aldrich
Dimetilsulfóxido, puriss. p.a., ACS reagent, ≥99.9% (GC)
Sigma-Aldrich
Dimetilsulfóxido, anhydrous, ≥99.9%
Sigma-Aldrich
Magnesium nitrate hexahydrate, ACS reagent, 99%
Sigma-Aldrich
Dimetilsulfóxido, BioUltra, for molecular biology, ≥99.5% (GC)
Sigma-Aldrich
Dimetilsulfóxido, puriss. p.a., dried, ≤0.02% water
Sigma-Aldrich
Dimetilsulfóxido, PCR Reagent
Sigma-Aldrich
Dimetilsulfóxido, meets EP testing specifications, meets USP testing specifications
Sigma-Aldrich
Magnesium nitrate hexahydrate, 99.999% trace metals basis
Sigma-Aldrich
Magnesium nitrate hexahydrate, puriss. p.a., ACS reagent, 98.0-102.0% (KT)
USP
Dimetilsulfóxido, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Magnesium nitrate hexahydrate, BioXtra, ≥98%
Sigma-Aldrich
Dimethyl sulfoxide solution, 50 wt. % in H2O
Supelco
Dimetilsulfóxido, analytical standard
Sigma-Aldrich
Magnesium nitrate hexahydrate, BioUltra, ≥99.0% (KT)
Supelco
Dimetilsulfóxido, for inorganic trace analysis, ≥99.99995% (metals basis)
Sigma-Aldrich
Dimetilsulfóxido, ≥99.5%
Sigma-Aldrich
8-Octanoyloxypyrene-1,3,6-trisulfonic acid trisodium salt, suitable for fluorescence, ≥90% (HPCE)
Sigma-Aldrich
Dimetilsulfóxido, suitable for HPLC
Sigma-Aldrich
Dimetilsulfóxido, JIS special grade, ≥99.0%
Sigma-Aldrich
Dimetilsulfóxido, Vetec, reagent grade, 99%
Dimetilsulfóxido, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Dimetilsulfóxido, SAJ first grade, ≥99.0%