Skip to Content
Merck
  • Determination of 15 sedative residues in mutton by rapid resolution liquid chromatography-tandem mass spectrometry.

Determination of 15 sedative residues in mutton by rapid resolution liquid chromatography-tandem mass spectrometry.

Journal of the science of food and agriculture (2014-06-21)
Jinmei Wei, Yuzhu Luo, Li Zhang, Suli Fang
ABSTRACT

The use of xenobiotic compounds in animal husbandry has given rise to consumer anxieties regarding residual risk and food safety. Thus, animal tissues have become main samples for residue analysis and food safety for sedatives. In this study, a rapid resolution liquid chromatography-tandem mass spectrometry (RRLC-MS/MS) method was established for the determination of 15 sedatives residues in mutton. After enzymolysis, sedatives residues in mutton were extracted by ammonium hydroxide-acetonitrile (10:90, v/v) and determined by RRLC-MS/MS with quantification by standard curve method. The calibration curves showed good linearity within the concentrations of 0.5-50 µg kg(-1) with the correlation coefficients (r(2)) ranged from 0.9639 to 0.9984. The limits of detection (LODs) and quantification (LOQs) were 0.25-2.5 and 0.5-5 µg kg(-1), respectively. The average recoveries of spikes samples were in the ranges of 74.1-116.8% with relative standard deviations of intra- and inter-day ranged from 2.6% to 11.2% and from 2.1% to 11.4%, respectively. This method is simple, sensitive and accurate in the determination of sedative residues.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, NMR reference standard
Sigma-Aldrich
Hydrogen chloride solution, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Methanol, SAJ special grade
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Hydrochloric acid solution, 1 M
Sigma-Aldrich
Hydrochloric acid solution, 6 M
Sigma-Aldrich
Methanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Methanol, JIS 300, ≥99.8%, for residue analysis
Sigma-Aldrich
Hydrochloric acid solution, 12 M
Sigma-Aldrich
Hydrochloric acid solution, 0.2 M
Sigma-Aldrich
Hydrochloric acid solution, 0.05 M
Sigma-Aldrich
Hydrochloric acid, SAJ first grade, 35.0-37.0%
Sigma-Aldrich
Hydrochloric acid solution, 0.02 M
Supelco
Hydrogen chloride – ethanol solution, ~1.25 M HCl, for GC derivatization, LiChropur
Sigma-Aldrich
Hydrochloric acid solution, ~6 M in H2O, for amino acid analysis
Supelco
Hydrogen chloride – methanol solution, ~1.25 m HCl (T), for GC derivatization, LiChropur
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, 99.93%
Supelco
Carazolol, analytical standard
Supelco
Methanol, analytical standard
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (v/v) trifluoroacetic acid
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Supelco
Hydrochloric acid solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, for molecular biology
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrile solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol
Sigma-Aldrich
Hydrochloric acid solution, 0.5 M
Sigma-Aldrich
Hydrochloric acid, JIS special grade, 35.0-37.0%