The effect of Ti anodized nano-foveolae structure on preosteoblast growth and osteogenic gene expression.

The effect of Ti anodized nano-foveolae structure on preosteoblast growth and osteogenic gene expression.

Journal of nanoscience and nanotechnology (2014-04-18)

Wei-Qiang Yu, Ling Xu, Fu-Qiang Zhang

ABSTRACT

The TiO2 nanotubes by anodization have been extensively studied for medical implant and orthopedic applications because of enhancing bone development. In the present study, a new nano-foveolae structure verified by SEM and AFM was prepared by simulating the nanotubes exfoliation from anodized Ti. MC3T3-E1 preosteoblasts were used to investigate the effects of new nanoscale surface on cell spreading, proliferation, and osteogenic gene expression. The new nano-foveolae structure supported preosteoblast better spreading, more filopodiaes shown by SEM (4 h), and lower proliferation (72 h) than the smooth Ti. By two weeks, the new nanoscale surface induced higher expression of osteogenic markers alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN), and collagen I (COL I) with real-time RT-PCR compared to the control group. The results of this study suggest that the new nano-foveolae structure provides a favorable surface for functions of bone cells.

MATERIALS

Product Number

Brand

Product Description

IRMM531C

Titanium, IRMM^®, certified reference material, 0.5 mm wire

IRMM531B

Titanium, IRMM^®, certified reference material, 0.5 mm foil

267902

Sigma-Aldrich

Titanium, wire, diam. 0.81 mm, 99.7% trace metals basis

305812

Sigma-Aldrich

Titanium, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

348848

Sigma-Aldrich

Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis

348791

Sigma-Aldrich

Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis

266035

Sigma-Aldrich

Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis

369489

Sigma-Aldrich

Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis

460400

Sigma-Aldrich

Titanium, wire, diam. 0.25 mm, 99.7% trace metals basis

GF12929744

Titanium, microfoil, disks, 25mm, thinness 0.25μm, specific density 112.6μg/cm², permanent mylar 3.5μm support, 99.6+%

GF17705516

Titanium, rod, 200mm, diameter 3.0mm, annealed, 99.6+%

GF82495198

Titanium, rod, 200mm, diameter 9.5mm, annealed, 99.99+%

GF65694426

Titanium, tube, 100mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%

GF28411703

Titanium, tube, 100mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%

GF72212813

Titanium, tube, 200mm, outside diameter 25.4mm, inside diameter 23.62mm, wall thickness 0.89mm, annealed, 99.6+%

GF54883581

Titanium, rod, 1000mm, diameter 3.0mm, annealed, 99.6+%

GF16031843

Titanium, mesh, 100x100mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave

GF80010492

Titanium, rod, 200mm, diameter 16mm, annealed, 99.6+%

GF61322699

Titanium, rod, 100mm, diameter 2mm, annealed, 99.6+%

GF23916618

Titanium, microfoil, disks, 25mm, thinness 0.5μm, specific density 225.4μg/cm², permanent mylar 3.5μm support, 99.6+%

GF91859967

Titanium, rod, 100mm, diameter 9.5mm, annealed, 99.99+%

GF66991179

Titanium, rod, 100mm, diameter 2mm, as drawn, 99.99+%

GF31127712

Titanium, rod, 10mm, diameter 50mm, 99.99+%

GF54978249

Titanium, rod, 200mm, diameter 4mm, annealed, 99.6+%

GF88742054

Titanium, tube, 200mm, outside diameter 4.25mm, inside diameter 3.75mm, wall thickness 0.25mm, annealed, 99.6+%

GF50171318

Titanium, rod, 25mm, diameter 16mm, as drawn, 99.99+%

GF51463357

Titanium, tube, 200mm, outside diameter 10.3mm, inside diameter 8.7mm, wall thickness 0.8mm, annealed, 99.6+%

GF05438066

Titanium, tube, 1000mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%

GF29391329

Titanium, tube, 1000mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%

GF05925281

Titanium, microfoil, disks, 10mm, thinness 0.1μm, specific density 42.8μg/cm², permanent mylar 3.5μm support, 99.6+%