US EPA Method 624: GC Analysis of Volatiles on SPB®-624 after Purge & Trap using "K" Trap, Fast GC Analysis
Matériaux
Colonne analytique
Réf. du produit
Description
Tarif
Produit(s) apparenté(s)
Réf. du produit
Description
Tarif
EPA Vials, white polypropylene screw top hole cap, pre-cleaned and assembled
volume 40 mL, clear glass vial, vial O.D. × H 29 mm × 82 mm, pkg of 72 eaEPA Vials, white polypropylene screw top hole cap, pre-cleaned and assembled
volume 40 mL, amber glass vial, O.D. × H 29 mm × 82 mm, pkg of 72 eaPréparation d'échantillons
Réf. du produit
Description
Tarif
Purge/Trap K Vocarb® 3000
for use with Tekmar® Velocity XPT, LSC-1, LSC-2, LSC-2000, 4000 (Straight, 12 in./30.5 cm, Swagelok fitting), HT-3Purge/Trap K Vocarb® 3000
for use with Tekmar® 3000, 3100 (Straight, 12 in./30.5 cm, Valco fittingÀ utiliser avec
Réf. du produit
Description
Tarif
Seringue Hamilton®, série 1000 GASTIGHT®, PTFE Luer-Lok
1005TLL, PTFE Luer lock, volume 5 mL, needle size (not included)Seringue Hamilton®, série 1000 GASTIGHT®, PTFE Luer-Lok
1005SLPT (for Purge & Trap), volume 5 mL, needle size (not included)Étalon
Réf. du produit
Description
Tarif
Mélange de calibration B pour EPA 624
certified reference material, 2000 μg/mL each component in methanolMélange d′étalonnage purgeable EPA 624 sans gaz, inclut 2-CEVE
2000 μg/mL each component in methanol, without gases, analytical standardCONDITIONS
sample/matrix
each analyte at 50 ppb in 5 mL water
purge trap
VOCARB 3000 “K”
purge
40 mL/min at 25 °C for 11 min
dry purge
2 min
desorption preheat
205 °C
desorption process
150 mL/min at 210 °C for 2 min
bake
260 °C for 10 min
transfer line/valve temp.
110 °C
column
SPB-624, 20 m × 0.18 mm I.D., 1.0 μm (28662-U)
oven
40 °C (1 min), 11 °C/min to 125 °C, 35 °C/min to 230 °C (2 min)
inj. temp.
150 °C
MSD interface
200 °C
scan range
m/z = 35-400
carrier gas
helium, 1.5 mL/min
injection
100:1 split
liner
0.75 mm I.D. SPME
Description
Informations légales
SPB is a registered trademark of Merck KGaA, Darmstadt, Germany