Skip to Content
Merck
  • Aluminum toxicity recovery processes in root apices. Possible association with oxidative stress.

Aluminum toxicity recovery processes in root apices. Possible association with oxidative stress.

Plant science : an international journal of experimental plant biology (2012-02-14)
Hideaki Matsumoto, Hirotoshi Motoda
ABSTRACT

Al inhibits root apex elongation with concomitant morphological injuries such as ruptures punctuated by the regions stained with Evans blue. The recovery can be investigated by transfer of Al-injured roots to a solution lacking Al. In the Al-injured root apex, superoxide anion, H(2)O(2), Al, and lignin accumulate. During the recovery process, the central cylinder elongates leaving the region stained with Evans blue without marked disappearance. The obvious function of the region is not clear but may trigger the elongation of central cylinder during the recovery process. Thus the function of the region stained with Evans blue might be derived from the programmed cell-like idea. Oxidative stress concerns events induced under Al toxicity and the recovery process. The superoxide anion is primarily formed by plasma membrane-associated NADPH oxidase and is dismuted to H(2)O(2) and O(2) by superoxide dismutase. H(2)O(2) provides the electrons for the polymerization of phenolics to lignin, which causes the stiffening of the cell wall. The distortion of the cell wall caused by lignin may induce the breaking and tearing of cells, which results in the formation of ruptures at the rhizodermis and outer cortex layers. The production of superoxide anion, H(2)O(2), and lignin was reduced during the recovery process and thereby the elongation of the central cylinder may be induced.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Aluminum, powder, <5 μm particle size, 99.5% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 8 μm, 99% trace metals basis
Aluminum, IRMM®, certified reference material, 1.0 mm foil
Sigma-Aldrich
Aluminum, powder, ≥91% (complexometric)
Sigma-Aldrich
Aluminum, pellets, 3-8 mesh, ≥99.999% trace metals basis
Sigma-Aldrich
Aluminum, granular, <1 mm, 99.7% trace metals basis
Sigma-Aldrich
Aluminum, powder, <75 μm, ≥99.95% trace metals basis
Sigma-Aldrich
Aluminum, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminum, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, ≤30 μm, spherical powder, ≥99%
Sigma-Aldrich
Aluminum, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
Aluminum, IRMM®, certified reference material, 1.0 mm wire
Aluminum, insulated wire, 20m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Aluminum, mesh, 900x900mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
Aluminum, microfoil, disks, 25mm, thinness 1.0μm, specific density 269.9μg/cm2, permanent mylar 3.5μm support, 99.999%
Aluminum, insulated wire, 2m, conductor diameter 0.1mm, insulation thickness 0.005mm, polyimide insulation, 99.95+%
Aluminum, microleaf disks, 25mm, thinness 0.15μm, specific density 41.28μg/cm2, removable support, 99.999%
Aluminum, microleaf disks, 25mm, thinness 0.25μm, specific density 68.8μg/cm2, removable support, 99.999%
Aluminum, sphere, 100pcs, diameter 6.0mm, 99%
Aluminum, tube, 500mm, outside diameter 3.0mm, inside diameter 1.62mm, wall thickness 0.69mm, hard, 99.5%
Aluminum, microleaf disks, 25mm, thinness 0.5μm, specific density 120.6μg/cm2, removable support, 99.999%
Aluminum, rod, 100mm, diameter 28mm, as drawn, 99.999%
Aluminum, wire reel, 500m, diameter 1.0mm, as drawn, 99.95+%
Aluminum, wire reel, 20m, diameter 0.02mm, hard, 99.99%
Aluminum, wire reel, 10m, diameter 1.5mm, as drawn, 99.999%
Aluminum, wire reel, 500m, diameter 0.30mm, as drawn, 99.5%
Aluminum, wire reel, 10m, diameter 0.015mm, hard, 99.99%
Aluminum, wire reel, 2m, diameter 0.25mm, as drawn, 99.999%
Aluminum, wire reel, 200m, diameter 0.25mm, as drawn, 99.95+%
Aluminum, wire reel, 20m, diameter 0.25mm, hard, 99.99+%