Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Journal of nanoscience and nanotechnology (2014-04-18)

Yupeng Zhang, Jian Wu, Ying Zhang, Wenbin Guo, Shenping Ruan

ABSTRACT

Na2Ti3O7 nanotubes was synthesized by a hydrothermal method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Then the material was coated on Al2O3 ceramic substrate to fabricate humidity sensors using Ag-Pd as interdigitated electrodes. The sensor shows high humidity sensitivity and quick response-recovery time. The impedance changes about five orders of magnitude within humidity range from 11% to 95% relative humidity (RH). At the frequency of 100 Hz, the response time is 2 s and recovery time is 4 s, and the maximum hysteresis is less than 3% RH. Moreover, complex impedance property at different RH was investigated to study sensing mechanism. The results indicate the potential applications of Na2Ti3O7 nanotubes for fabricating high-performance humidity sensors.

MATERIALS

Product Number

Brand

Product Description

348848

Sigma-Aldrich

Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis

266035

Sigma-Aldrich

Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis

IRMM531C

Titanium, IRMM^®, certified reference material, 0.5 mm wire

IRMM531B

Titanium, IRMM^®, certified reference material, 0.5 mm foil

95284

Sigma-Aldrich

Water, for molecular biology, sterile filtered

95280

Sigma-Aldrich

Water, tested according to Ph. Eur.

195294

Sigma-Aldrich

Water, deuterium-depleted, ≤1 ppm (Deuterium oxide)

460400

Sigma-Aldrich

Titanium, wire, diam. 0.25 mm, 99.7% trace metals basis

305812

Sigma-Aldrich

Titanium, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)

369489

Sigma-Aldrich

Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis

348791

Sigma-Aldrich

Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis

267902

Sigma-Aldrich

Titanium, wire, diam. 0.81 mm, 99.7% trace metals basis

W4502

Sigma-Aldrich

Water, Nuclease-Free Water, for Molecular Biology

W3500

Sigma-Aldrich

Water, sterile-filtered, BioReagent, suitable for cell culture

W1754

Sigma-Aldrich

Water, PCR Reagent

2107

Sigma-Aldrich

E-Toxate^™ Water, endotoxin, free

W1503

Sigma-Aldrich

Water, for embryo transfer, sterile-filtered, BioXtra, suitable for mouse embryo cell culture

95283

Supelco

Water, for HPCE, for luminescence, suitable for UV/Vis spectroscopy

95289

Sigma-Aldrich

Water, for cell biology, sterile ultrafiltered

78533

Supelco

Water, for TOC analysis

00612

Supelco

Water, suitable for ion chromatography

W3513

Sigma-Aldrich

Water, BioPerformance Certified

12156

Supelco

Density Standard 998 kg/m³, H&D Fitzgerald Ltd. Quality

14211

Supelco

Water, ACS reagent, for ultratrace analysis

DENWAT

Pure Water Density Standard, UKAS ISO/IEC17025 and ISO Guide 34 certified, density: 0.9982 g/mL at 20 °C, density: 0.9970 g/mL at 25 °C

DENWAT3

Pure Water Density Standard, UKAS ISO/IEC17025 and ISO Guide 34 certified, density: 0.9982 g/mL at 20 °C, density: 0.9970 g/mL at 25 °C

GF05925281

Titanium, microfoil, disks, 10mm, thinness 0.1μm, specific density 42.8μg/cm², permanent mylar 3.5μm support, 99.6+%

GF76772391

Titanium, rod, 100mm, diameter 10mm, annealed, 99.6+%

GF85496664

Titanium, tube, 1000mm, outside diameter 9.5mm, inside diameter 8.2mm, wall thickness 0.65mm, annealed, 99.6+%

GF52551222

Titanium, microfoil, disks, 10mm, thinness 0.25μm, specific density 112.6μg/cm², permanent mylar 3.5μm support, 99.6+%