Al3+ ions dependent structural and magnetic properties of Co-Ni nano-alloys.

Al3+ ions dependent structural and magnetic properties of Co-Ni nano-alloys.

Journal of nanoscience and nanotechnology (2014-04-18)

R H Kadam, Suresh T Alone, Anil S Gaikwad, A P Birajdar, Sagar E Shirsath

ABSTRACT

Ferrite samples with a chemical formula Co0.5Ni0.5Al(x)Fe(2-x)O4 (where x = 0.0, 0.25, 0.5, 0.75 and 1.0) were synthesized by sol-gel auto-combustion method. The synthesized samples were annealed at 600 degrees C for 4 h. An analysis of X-ray diffraction (XRD) patterns reveals the formation of single phase cubic spinel structure. The lattice parameter decreased linearly with the increasing Al content x. Nano size of the powders were confirmed by the transmission electron micrographs (TEM). Particle size, bulk density decreased whereas specific surface area and porosity of the samples increased with the Al substitution. Cation distribution of constituent ions shows linear dependence of Al substitution. Based on the cation distribution obtained from XRD data, structural parameters such as lattice parameters, ionic radii of available sites and the oxygen parameter 'u' is calculated. Saturation magnetization (M(s)), magneton number (n(B)) and coercivity (H(c)) decreased with the Al substitution. Possible explanation for the observed structural and magnetic behavior with various Al content are discussed.

MATERIALS

Product Number

Brand

Product Description

697745

Sigma-Aldrich

Cobalt, Carbon coated magnetic, nanopowder, <50 nm particle size (TEM), ≥99%

267074

Sigma-Aldrich

Nickel, rod, diam. 6.35 mm, ≥99.99% trace metals basis

266981

Sigma-Aldrich

Nickel, powder, <50 μm, 99.7% trace metals basis

IRMM523B

Aluminum, IRMM^®, certified reference material, 1.0 mm foil

357553

Sigma-Aldrich

Nickel, foil, thickness 0.5 mm, 99.98% trace metals basis

357626

Sigma-Aldrich

Nickel, wire, diam. 0.5 mm, ≥99.9% trace metals basis

433705

Sigma-Aldrich

Aluminum, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis

326887

Sigma-Aldrich

Aluminum, wire, diam. 0.58 mm, ≥99.99% trace metals basis

326941

Sigma-Aldrich

Aluminum, pellets, 3-8 mesh, ≥99.999% trace metals basis

266558

Sigma-Aldrich

Aluminum, wire, diam. 1.0 mm, 99.999% trace metals basis

577995

Sigma-Aldrich

Nickel, nanopowder, <100 nm avg. part. size, ≥99% trace metals basis

326380

Sigma-Aldrich

Cobalt, foil, thickness 0.1 mm, ≥99.99%

518573

Sigma-Aldrich

Aluminum, granular, <1 mm, 99.7% trace metals basis

203076

Sigma-Aldrich

Cobalt, granular, 99.99% trace metals basis

266701

Sigma-Aldrich

Cobalt, wire, diam. 1.0 mm, 99.995% trace metals basis

356867

Sigma-Aldrich

Cobalt, foil, thickness 0.1 mm, 99.95% trace metals basis

266647

Sigma-Aldrich

Cobalt, powder, <150 μm, ≥99.9% trace metals basis

356891

Sigma-Aldrich

Cobalt, foil, thickness 1.0 mm, 99.95% trace metals basis

398810

Sigma-Aldrich

Cobalt, rod, diam. 5.0 mm, 99.95% trace metals basis

266655

Sigma-Aldrich

Cobalt, pieces, 99.5% trace metals basis

266639

Sigma-Aldrich

Cobalt, powder, 2 μm particle size, 99.8% trace metals basis

357588

Sigma-Aldrich

Nickel, foil, thickness 0.1 mm, 99.98% trace metals basis

IRMM523C

Aluminum, IRMM^®, certified reference material, 1.0 mm wire

733369

Sigma-Aldrich

Aluminum, foil, thickness 8 μm, 99% trace metals basis

GF38428241

Nickel, foil, 25mm disks, thickness 0.025mm, annealed, 99%

GF85965250

Nickel, tube, 100mm, outside diameter 3.0mm, inside diameter 2.4mm, wall thickness 0.3mm, hard, 99.5%

GF60907091

Nickel, wire reel, 20m, diameter 1.0mm, hard, 99.98%

GF57875417

Nickel, tube, 200mm, outside diameter 5.9mm, inside diameter 5.65mm, wall thickness 0.125mm, hard, 99.5%

GF23066197

Nickel, tube, 200mm, outside diameter 0.8mm, inside diameter 0.64mm, wall thickness 0.08mm, as drawn, 99.5%

GF64460099

Nickel, tube, 1000mm, outside diameter 1.8mm, inside diameter 1.6mm, wall thickness 0.1mm, hard, 99.5%