Skip to Content
Merck
  • Versatile ene-thiol photoclick reaction for preparation of multimodal monolithic silica capillary columns.

Versatile ene-thiol photoclick reaction for preparation of multimodal monolithic silica capillary columns.

Journal of chromatography. A (2014-09-25)
A Marechal, A Laaniste, R El-Debs, V Dugas, C Demesmay
ABSTRACT

This paper presents a photografting process of monolithic silica capillary columns based on the ene-thiol click chemistry. This study is performed on a "generic" vinyl-functionalized silica monolith (Hmin 6±1μm). The photoclick reaction is investigated using different thiol monomers (octadecanethiol, cysteine and sodium mercaptoethanesulfonate) to prepare capillary columns dedicated to various chromatographic modes (reversed-phase, HILIC and strong cation exchange). Whatever the monomer used, the photografting reaction is achieved in less than 5min with a relatively high thiol monomer content. This allows preparing highly retentive and efficient monolithic columns while avoiding polymerization and/or column clogging. In addition to the aforementioned properties (duration, versatility, efficiency), this photo-triggered chemical reaction allows addressing several appropriate surface functionalizations inside a single monolithic column in order to prepare nanovolume multimodal capillary columns. A multimodal biphasic monolithic column with a 1cm length cation-exchange segment followed by a 9cm length reversed-phase segment (SCX-RP) is prepared through two successive photografting reactions using a UV-mask to localize the reactions. This multimodal biphasic column is investigated using a model sample for the selective fractionation and separation of cationic and neutral compounds and is applied to the on-line preconcentration and separation of β-blockers.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, NMR reference standard
Sigma-Aldrich
Silica, nanopowder, 99.8% trace metals basis
Supelco
Melting point standard 47-49°C, analytical standard
Supelco
Melting point standard 235-237°C, analytical standard
Sigma-Aldrich
Cytosine, ≥99%
Sigma-Aldrich
1-Octadecanethiol, purum, ≥95.0% (GC)
Sigma-Aldrich
Urea solution, BioUltra, ~8 M in H2O
Supelco
Mettler-Toledo Calibration substance ME 18870, Benzophenone, traceable to primary standards (LGC)
Supelco
Naphthalene, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Triethylamine, for protein sequence analysis, ampule, ≥99.5% (GC)
Sigma-Aldrich
Triethylamine, BioUltra, ≥99.5% (GC)
Sigma-Aldrich
Triethylamine, for amino acid analysis, ≥99.5% (GC)
Supelco
Naphthalene, analytical standard
Sigma-Aldrich
Naphthalene, suitable for scintillation, ≥99%
Sigma-Aldrich
LUDOX® TM-40 colloidal silica, 40 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® SM colloidal silica, 30 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® HS-30 colloidal silica, 30 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® LS colloidal silica, 30 wt. % suspension in H2O
Sigma-Aldrich
Triethylamine, purum, ≥99% (GC)
Supelco
Methanol, analytical standard
Sigma-Aldrich
LUDOX® CL colloidal silica, 30 wt. % suspension in H2O
Sigma-Aldrich
Naphthalene, 99%
Sigma-Aldrich
Urea-12C, 99.9 atom % 12C
Sigma-Aldrich
Silica
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
1-Octadecanethiol, 98%
Sigma-Aldrich
Cytidine, 99%
Sigma-Aldrich
Silica, mesostructured, MSU-F (cellular foam)
Sigma-Aldrich
Cytidine, BioReagent, suitable for cell culture, powder, ≥99%
Sigma-Aldrich
Triethylamine, ≥99.5%