Direkt zum Inhalt
Merck
  • Sorptive extraction using polydimethylsiloxane/metal-organic framework coated stir bars coupled with high performance liquid chromatography-fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental water samples.

Sorptive extraction using polydimethylsiloxane/metal-organic framework coated stir bars coupled with high performance liquid chromatography-fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental water samples.

Journal of chromatography. A (2014-07-09)
Cong Hu, Man He, Beibei Chen, Cheng Zhong, Bin Hu
ZUSAMMENFASSUNG

In this work, metal-organic frameworks (MOFs, Al-MIL-53-NH₂) were synthesized via the hydrothermal method, and novel polydimethylsiloxane/metal-organic framework (PDMS/MOFs, PDMS/Al-MIL-53-NH₂)-coated stir bars were prepared by the sol-gel technique. The preparation reproducibility of the PDMS/MOFs-coated stir bar was good, with relative standard deviations (RSDs) ranging from 4.8% to 14.9% (n=7) within one batch and from 6.2% to 16.9% (n=6) among different batches. Based on this fact, a new method of PDMS/MOFs-coated stir bar sorptive extraction (SBSE) and ultrasonic-assisted liquid desorption (UALD) coupled with high performance liquid chromatography-fluorescence detection (HPLC-FLD) was developed for the determination of polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. To obtain the best extraction performance for PAHs, several parameters affecting SBSE, such as extraction time, stirring rate, and extraction temperature, were investigated. Under optimal experimental conditions, wide linear ranges and good RSDs (n=7) were obtained. With enrichment factors (EFs) of 16.1- to 88.9-fold (theoretical EF, 142-fold), the limits of detection (LODs, S/N=3) of the developed method for the target PAHs were found to be in the range of 0.05-2.94 ng/L. The developed method was successfully applied to the analysis of PAHs in Yangtze River and East Lake water samples.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Aluminium, powder, ≥91% (complexometric)
Sigma-Aldrich
Siliconöl, viscosity 10 cSt (25 °C)
Sigma-Aldrich
Siliconöl, viscosity 5 cSt (25 °C)
Sigma-Aldrich
Siliconöl, viscosity 20 cSt (25 °C)
Sigma-Aldrich
Siliconöl, viscosity 100 cSt (25 °C)
Sigma-Aldrich
Siliconöl, viscosity 1,000 cSt (25 °C)
Sigma-Aldrich
Aluminium, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Siliconöl, viscosity 350 cSt (25 °C)
Sigma-Aldrich
Siliconöl, viscosity 500 cSt (25 °C)
Sigma-Aldrich
Aluminium, granular, <1 mm, 99.7% trace metals basis
Sigma-Aldrich
Siliconöl, viscosity 50 cSt (25 °C)
Sigma-Aldrich
Siliconöl, viscosity 10,000 cSt (25 °C)
Sigma-Aldrich
Aluminium, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, ReagentPlus®, beads, 5-15 mm, 99.9% trace metals basis
Sigma-Aldrich
Aluminium, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
Aluminium, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
Siliconöl, for oil baths (from −50°C to +200°C)
Sigma-Aldrich
Aluminium, ACS reagent, 99%, wire, wire diam. ~1.5 mm
Sigma-Aldrich
Aluminium, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Siliconöl, viscosity 100,000 cSt (25 °C)
Sigma-Aldrich
Aluminium, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Siliconöl, viscosity 60,000 cSt (25 °C)
Sigma-Aldrich
Aluminium, foil, thickness 8 μm, 99% trace metals basis
Aluminium, rod, 1000mm, diameter 12.7mm, 99%
Sigma-Aldrich
Siliconöl, viscosity 30,000 cSt (25 °C)
Sigma-Aldrich
Aluminium, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
Aluminium, sphere, 100pcs, diameter 1.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
Sigma-Aldrich
Aluminium, pellets, 3-8 mesh, ≥99.999% trace metals basis
Siliconöl, for melting point and boiling point apparatuses