Direkt zum Inhalt
Merck

Effect of TiO2 on the photocatalytic properties of bismuth oxide.

Environmental technology (2014-04-08)
Gourav Singla, K Singh
ZUSAMMENFASSUNG

Bi2-xTixO3+x/2 (x = 0.05, 0.10 and 0.15) photocatalysts are prepared by solid-state technique. The band gap of the prepared sample was estimated from the onset of UV-Vis absorption spectra. The photocatalytic activities of as prepared samples are investigated under UV light irradiation for the decomposition of methyl orange (MO). It has been observed that the rate of decomposition of MO increased with increasing Ti4+ content in the present samples. Moreover, it shows better photocatalytic activity than undoped Bi2O3 and TiO2. The lowest band gap is observed for x = 0.15 sample, i.e. 2.55 eV, which also showed the highest photocatalytic activity in the present sample.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Titan(IV)-oxid, nanopowder, 21 nm primary particle size (TEM), ≥99.5% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Anatase, nanopowder, <25 nm particle size, 99.7% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Anatase, powder, 99.8% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, ReagentPlus®, ≥99%
Sigma-Aldrich
Titan(IV)-oxid, Rutil, powder, <5 μm, ≥99.9% trace metals basis
Sigma-Aldrich
Bismut(III)-Oxid, ReagentPlus®, powder, 10 μm, 99.9% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Anatase, powder, −325 mesh, ≥99% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Rutil, nanopowder, <100 nm particle size, 99.5% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Mischung aus Rutil und Anatas, nanopowder, <100 nm particle size (BET), 99.5% trace metals basis
Sigma-Aldrich
Bismut(III)-Oxid, powder, 99.999% trace metals basis
Sigma-Aldrich
Bismut(III)-Oxid, nanopowder, 90-210 nm particle size, 99.8% trace metals basis
Sigma-Aldrich
Methylorange, ACS reagent, Dye content 85 %
Sigma-Aldrich
Titan(IV)-oxid, Mischung aus Rutil und Anatas, nanoparticles, <150 nm particle size (volume distribution, DLS), dispersion, 40 wt. % in H2O, 99.5% trace metals basis
Sigma-Aldrich
Bismut, powder, −100 mesh, 99% trace metals basis
Sigma-Aldrich
Methylorange, for microscopy (Hist.), indicator (pH 3.0-4.4)
Sigma-Aldrich
Titan(IV)-oxid, Rutil, ≥99.98% trace metals basis
Sigma-Aldrich
Bismut, powder, −100 mesh, ≥99.99% trace metals basis
Sigma-Aldrich
Bismut, granular, ≥99.99% trace metals basis
Sigma-Aldrich
Bismut, pieces, 1-12 mm, 99.999% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Rutil, 99.995% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, contains 1% Mn as dopant, nanopowder, <100 nm particle size (BET), ≥97%
Sigma-Aldrich
Titan(IV)-oxid, nanowires, diam. × L ~100 nm × 10 μm
Sigma-Aldrich
Titan(IV)-oxid, nanowires, diam. × L ~10 nm × 10 μm
Sigma-Aldrich
Bismut, shot, 4-30 mesh, 99.9% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Rutil, <001>, (single crystal substrate), ≥99.9% trace metals basis, L × W × thickness 10 mm × 10 mm × 0.5 mm
Sigma-Aldrich
Bismut(III)-Oxid, purum, ≥98.0% (KT)
Sigma-Aldrich
Bismut, beads, 1-5 mm, 99.999% trace metals basis
Bismut, foil, light tested, 50x50mm, thickness 0.02mm, permanent polyester support, 99.97%
Bismut, foil, 25x25mm, thickness 0.25mm, 100%
Bismut, foil, 25x25mm, thickness 0.5mm, 100%