Saltar al contenido
Merck

Effect of pH, salt and chemical rinses on bacterial attachment to extracellular matrix proteins.

Food microbiology (2013-04-02)
Siti Shahara Zulfakar, Jason D White, Tom Ross, Mark Tamplin
RESUMEN

Microbial contamination of carcass surfaces occurs during slaughter and post-slaughter processing steps, therefore interventions are needed to enhance meat safety and quality. Although many studies have been done at the macro-level, little is known about specific processes that influence bacterial attachment to carcass surfaces, particularly the role of extracellular matrix (ECM) proteins. In the present study, the effect of pH and salt (NaCl, KCl and CaCl2) on attachment of Escherichia coli and Salmonella isolates to dominant ECM proteins: collagen I, fibronectin, collagen IV and laminin were assessed. Also, the effects of three chemical rinses commonly used in abattoirs (2% acetic acid, 2% lactic acid and 10% trisodium phosphate (TSP)) were tested. Within a pH range of 5-9, there was no significant effect on attachment to ECM proteins, whereas the effect of salt type and concentration varied depending on combination of strain and ECM protein. A concentration-dependant effect was observed with NaCl and KCl (0.1-0.85%) on attachment of E. coli M23Sr, but only to collagen I. One-tenth percent CaCl2 produced the highest level of attachment to ECM proteins for E. coli M23Sr and EC614. In contrast, higher concentrations of CaCl2 increased attachment of E. coli EC473 to collagen IV. Rinses containing TSP produced >95% reduction in attachment to all ECM proteins. These observations will assist in the design of targeted interventions to prevent or disrupt contamination of meat surfaces, thus improving meat safety and quality.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Cloruro de potasio, ACS reagent, 99.0-100.5%
Sigma-Aldrich
Cloruro de calcio dihydrate, ACS reagent, ≥99%
Sigma-Aldrich
Cloruro de calcio dihydrate, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Cloruro de calcio solution, BioUltra, for molecular biology, ~1 M in H2O
Sigma-Aldrich
Cloruro de potasio, for molecular biology, ≥99.0%
Sigma-Aldrich
Cloruro de potasio, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E508, 99-100.5% (AT), ≤0.0001% Al
Sigma-Aldrich
Cloruro de potasio, powder, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
Calcium chloride, anhydrous, BioReagent, suitable for insect cell culture, suitable for plant cell culture, ≥96.0%
Sigma-Aldrich
Cloruro de potasio, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Cloruro de calcio dihydrate, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99.0%
Sigma-Aldrich
Cloruro de calcio dihydrate, for molecular biology, ≥99.0%
Sigma-Aldrich
Cloruro de potasio solution, BioUltra, for molecular biology, ~1 M in H2O
Sigma-Aldrich
Cloruro de potasio, puriss. p.a., ≥99.5% (AT)
Sigma-Aldrich
Calcium chloride, anhydrous, powder, 99.99% trace metals basis
Sigma-Aldrich
Cloruro de potasio, BioUltra, for molecular biology, ≥99.5% (AT)
Sigma-Aldrich
Cloruro de calcio dihydrate, BioUltra, for molecular biology, ≥99.5% (KT)
Sigma-Aldrich
Cloruro de calcio dihydrate, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99%
Sigma-Aldrich
Cloruro de potasio, 99.999% trace metals basis
Supelco
Potassium chloride solution, for Ag/AgCl electrodes, ~3 M KCl, saturated with silver chloride
Sigma-Aldrich
Cloruro de calcio dihydrate, puriss., meets analytical specification of Ph. Eur., USP, FCC, E509, 99-103%, ≤0.0001% Al
Sigma-Aldrich
Calcium chloride, AnhydroBeads, −10 mesh, ≥99.9% trace metals basis
Sigma-Aldrich
Cloruro de potasio, BioXtra, ≥99.0%
Sigma-Aldrich
Cloruro de potasio, ≥99.99% trace metals basis
Sigma-Aldrich
Cloruro de calcio dihydrate, tested according to Ph. Eur.
Sigma-Aldrich
Cloruro de calcio dihydrate
Supelco
Cloruro de potasio solution, BioUltra, ~3 M in H2O
Sigma-Aldrich
Cloruro de calcio dihydrate, BioXtra, ≥99.0%
Supelco
Cloruro de calcio solution, analytical standard, 1.000 g/L Ca+2 in hydrochloric acid, traceable to BAM
Supelco
Cloruro de potasio solution, 1 M KCl
Supelco
Cloruro de calcio solution, 0.1 M Ca, analytical standard (for ion-selective electrodes)