- Ultrasound assisted design of sulfur/carbon cathodes with partially fluorinated ether electrolytes for highly efficient Li/S batteries.
Ultrasound assisted design of sulfur/carbon cathodes with partially fluorinated ether electrolytes for highly efficient Li/S batteries.
Advanced materials (Deerfield Beach, Fla.) (2013-01-22)
Wei Weng, Vilas G Pol, Khalil Amine
PMID23335003
ABSTRACT
A one-step, eco-friendly ultrasound-assisted process is established for the rapid synthesis of sulfur-carbon composite cathode materials, avoiding the widely used, energy inefficient "melt-down" process for Li-S batteries. It is demonstrated that, without inserting sulfur into pores of carbon, the coulombic efficiency of SC/Li cell in the new DOL/D2 electrolyte is greater than 96% for 100 cycles, which is far superior to the reported numerous electrolyte formulations.
MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto
Sigma-Aldrich
Dietiletere, contains BHT as inhibitor, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Sodium thiosulfate pentahydrate, puriss., meets analytical specification of Ph. Eur., BP, USP
Sigma-Aldrich
Dietiletere, ACS reagent, ≥98.0%, contains ≤2% ethanol and ≤10ppm BHT as inhibitor
Sigma-Aldrich
Dietiletere, puriss., contains ~5 mg/L 2,6-di-tert.-butyl-4-methylphenol as stabilizer, meets analytical specification of Ph. Eur., BP, ≥99.5% (GC)
Sigma-Aldrich
Dietiletere, reagent grade, ≥98%, contains ≤2% ethanol and ≤10ppm BHT as inhibitor