Accéder au contenu
Merck

Accelerated separation of GC-amenable lipid classes in plant oils by countercurrent chromatography in the co-current mode.

Analytical and bioanalytical chemistry (2015-10-07)
Simon Hammann, Michael Englert, Marco Müller, Walter Vetter
RÉSUMÉ

Triacylglycerols represent the major part (>90%) in most plant oils and have to be eliminated, when the minor compounds such as phytosterols or tocopherols should be analyzed. Here, we used an all liquid-liquid chromatographic technique, countercurrent chromatography (CCC), to fractionate the minor lipids before gas chromatography (GC) analysis. To cover the wide range of polarity of the minor compounds, we used the co-current mode, in which both mobile and stationary phase are pumped through the system. This allowed to elute substances which partitioned almost exclusively in the stationary phase within 90 min. After testing with standard compounds, the method was applied to the separation of sesame oil and sunflower oil samples. The abundant triacylglycerols could be effectively separated from tocopherols, phytosterols, diacylglycerols, and free fatty acids in the samples, and these compounds could be analyzed (after trimethylsilylation) by GC coupled with mass spectrometry. After the enrichment caused by the CCC fractionation, we were also able to identify the tocopherol derivative α-tocomonoenol, which had not been described in sunflower oil before. Also, separation of sesame oil yielded a mixture of the polar compounds sesamin and sesamolin without further impurities.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Pyridine, ACS reagent, ≥99.0%
Sigma-Aldrich
Oxyde d′aluminium, activated, basic, Brockmann I
Sigma-Aldrich
Acide oléique, technical grade, 90%
Sigma-Aldrich
Oxyde d′aluminium, activated, neutral, Brockmann I
Supelco
N,O-Bis(triméthylsilyl)trifluoroacétamide avec triméthylchlorosilane, with 1% trimethylchlorosilane, for GC derivatization, LiChropur
Sigma-Aldrich
Acide palmitique, ≥99%
Sigma-Aldrich
Chlorotrimethylsilane, ≥98.0% (GC)
Sigma-Aldrich
Pyridine, ReagentPlus®, ≥99%
Sigma-Aldrich
Pyridine, anhydrous, 99.8%
Sigma-Aldrich
5α-cholestane, ≥97.0% (HPLC)
Sigma-Aldrich
Chlorotrimethylsilane, purified by redistillation, ≥99%
Sigma-Aldrich
Acide oléique, BioReagent, suitable for cell culture
Sigma-Aldrich
N,O-Bis(triméthylsilyl)trifluoroacétamide, ≥99%
Sigma-Aldrich
Acide oléique, ≥99% (GC)
Sigma-Aldrich
Methyl oleate, 99%
Sigma-Aldrich
Oxyde d′aluminium, activated, acidic, Brockmann I
Sigma-Aldrich
Oxyde d′aluminium, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
Oxyde d′aluminium, powder, primarily α phase, ≤10 μm avg. part. size, 99.5% trace metals basis
Sigma-Aldrich
Oxyde d′aluminium, powder, 99.99% trace metals basis
Sigma-Aldrich
Acide palmitique, BioXtra, ≥99%
Sigma-Aldrich
Acide oléique, meets analytical specification of Ph, Eur., 65.0-88.0% (GC)
Sigma-Aldrich
Acide oléique, natural, FCC
Sigma-Aldrich
Aluminum oxide, nanoparticles, <50 nm particle size (DLS), 20 wt. % in isopropanol
Sigma-Aldrich
Oxyde d′aluminium, pellets, 3 mm
Sigma-Aldrich
Oxyde d′aluminium, nanopowder, 13 nm primary particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
Oxyde d′aluminium, Corundum, α-phase, -100 mesh
Sigma-Aldrich
Oxyde d′aluminium, fused, powder, primarily α-phase, -325 mesh
Sigma-Aldrich
Oxyde d′aluminium, 99.997% trace metals basis
Sigma-Aldrich
Pyridine, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
Pyridine, ≥99%