Accéder au contenu
Merck
  • Membrane-integrated hybrid system for the effective treatment of ammoniacal wastewater of coke-making plant: a volume reduction approach.

Membrane-integrated hybrid system for the effective treatment of ammoniacal wastewater of coke-making plant: a volume reduction approach.

Environmental technology (2014-06-25)
Ramesh Kumar, Parimal Pal
RÉSUMÉ

Nanofiltration (NF) of ammoniacal wastewater containing phenol and cyanide has been investigated for effective separation of these hazardous pollutants and for the subsequent downstream chemical treatment resulting in valuable by-product generation. Four different types of composite polyamide commercial NF membranes (Sepro, USA) were tested under different operating conditions including transmembrane pressure and recovery rate (RR). At a transmembrane pressure of 15 bar, the achieved rejection of cyanide and phenol were 95% and 93%, respectively (concentrated stream) when the permeate contained 85% of ammonium-N. A high flux of 120 L m-2 h-1 was achieved during NF at a concentrated mode, with a volumetric cross-flow rate of 800 L h-1 at a pH of 10.0. The RR was 60% for the NF 1 membrane. Fenton's reagents (7.0 and 3.75 g L-1 H202 and FeSO4 . 7H20, respectively) were used to degrade more than 99% of pollutants present in the concentrated stream. In the permeate side, 97% of NH4+ -N was precipitated out as struvite by using Mg2+ : NH4 : PO+4 in 1:1:1 molar ratio at pH 9.0.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Peroxyde d'hydrogène solution, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Peroxyde d'hydrogène solution, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Peroxyde d'hydrogène solution, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Iron, ≥99%, reduced, powder (fine)
Sigma-Aldrich
Peroxyde d'hydrogène solution, 30% (w/w), puriss. p.a., reag. ISO, reag. Ph. Eur.
Sigma-Aldrich
Phénol solution, BioReagent, Equilibrated with 10 mM Tris HCl, pH 8.0, 1 mM EDTA, for molecular biology
Sigma-Aldrich
Peroxyde d'hydrogène solution, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Peroxyde d'hydrogène solution, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Phénol solution, BioReagent, Saturated with 0.01 M citrate buffer, pH 4.3 ± 0.2, for molecular biology
Sigma-Aldrich
Phénol, ≥99%
Sigma-Aldrich
Peroxyde d'hydrogène solution, purum p.a., ≥35% (RT)
Sigma-Aldrich
Carbonyl iron, ≥97% Fe basis
Sigma-Aldrich
Phénol, puriss. p.a., ACS reagent, reag. Ph. Eur., 99.0-100.5%
Millipore
Peroxyde d'hydrogène solution, 3%, suitable for microbiology
Sigma-Aldrich
Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Iron, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
Phénol, natural, 97%, FG
Sigma-Aldrich
Iron, powder, −325 mesh, 97%
Sigma-Aldrich
Phénol solution, ≥89.0%
Supelco
Phénol solution, certified reference material, 500 μg/mL in methanol
Sigma-Aldrich
Phénol, BioUltra, for molecular biology, TE-saturated, ~73% (T)
Supelco
Peroxyde d'hydrogène solution, ≥30%, for trace analysis
Sigma-Aldrich
Phénol, for molecular biology
Sigma-Aldrich
Peroxyde d'hydrogène solution, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications
Sigma-Aldrich
Peroxyde d'hydrogène solution, 34.5-36.5%
Sigma-Aldrich
Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Supelco
Phénol solution, 5000 μg/mL in methanol, certified reference material
Supelco
Peroxyde d'hydrogène solution, 30 % (w/w), for ultratrace analysis
Sigma-Aldrich
Iron, chips, 99.98% trace metals basis
Sigma-Aldrich
Iron, wire, diam. 1.0 mm, ≥99.9% trace metals basis