Direkt zum Inhalt
Merck
  • A simple method for the determination of organochlorine pollutants and the enantiomers in oil seeds based on matrix solid-phase dispersion.

A simple method for the determination of organochlorine pollutants and the enantiomers in oil seeds based on matrix solid-phase dispersion.

Food chemistry (2015-10-17)
Jing Zhan, Jindong Li, Donghui Liu, Chang Liu, Genggeng Yang, Zhiqiang Zhou, Peng Wang
ZUSAMMENFASSUNG

A simple, rapid and effective method was developed based on matrix solid-phase dispersion (MSPD) for the determination of organochlorine pollutants including sixteen organochlorine pesticides (OCPs) and seven polychlorinated biphenyls (PCBs) in oil seeds (peanuts and soybeans). Among the organochlorine pollutants selected, α-HCH, heptachlor, o,p'-DDT, o,p'-DDD, trans-chlordane and cis-chlordane were chiral and their enantiomers were determined by GC-ECD with a chiral column. The MSPD procedure was optimized focusing on the type and amount of dispersion sorbent, co-column sorbent and eluting solvent. Under the optimized condition, good recoveries were obtained in the range of 68.9-103.3% with relative standard deviations (RSD) values below 16.1% in all cases. LODs and LOQs were in range of 0.1-2.0ngg(-1) and 0.4-6.7ngg(-1) respectively. In summary, the method set up was qualified to be used for the determination of the pollutants and the enantiomers in oil seeds.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Schwefelsäure, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Dichlormethan, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Aluminiumoxid, activated, basic, Brockmann I
Sigma-Aldrich
Hexan, ReagentPlus®, ≥99%
Sigma-Aldrich
Schwefelsäure, 99.999%
Sigma-Aldrich
Aluminiumoxid, activated, neutral, Brockmann I
Sigma-Aldrich
Hexan, Laboratory Reagent, ≥95%
Sigma-Aldrich
Hexan, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99% (GC)
Sigma-Aldrich
Dichlormethan, puriss. p.a., ACS reagent, reag. ISO, ≥99.9% (GC)
Sigma-Aldrich
Dichlormethan, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Schwefelsäure, puriss. p.a., for determination of Hg, ACS reagent, reag. ISO, reag. Ph. Eur., 95.0-97.0%
Sigma-Aldrich
Aluminiumoxid, powder, 99.99% trace metals basis
Sigma-Aldrich
Aluminiumoxid, activated, acidic, Brockmann I
Sigma-Aldrich
Aluminiumoxid, powder, primarily α phase, ≤10 μm avg. part. size, 99.5% trace metals basis
Sigma-Aldrich
Aluminiumoxid, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
Dichlormethan, puriss., meets analytical specification of Ph. Eur., NF, ≥99% (GC)
Sigma-Aldrich
Schwefelsäure, puriss., meets analytical specification of Ph. Eur., BP, 95-97%
Sigma-Aldrich
Aluminiumoxid, nanoparticles, <50 nm particle size (DLS), 20 wt. % in isopropanol
Sigma-Aldrich
Dichlormethan, ACS reagent, ≥99.5%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Dichlormethan, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Schwefelsäure -Lösung, puriss. p.a., ≥25% (T)
Sigma-Aldrich
Aluminiumoxid, Corundum, α-phase, -100 mesh
Sigma-Aldrich
Aluminiumoxid, pellets, 3 mm
Sigma-Aldrich
Aluminiumoxid, fused, powder, primarily α-phase, -325 mesh
Sigma-Aldrich
Aluminiumoxid, nanopowder, 13 nm primary particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
Aluminiumoxid, 99.997% trace metals basis
Sigma-Aldrich
Aluminiumoxid, Type WN-6, Neutral, Activity Grade Super I
Sigma-Aldrich
Aluminiumoxid, pore size 58 Å, ~150 mesh
Sigma-Aldrich
Dichlormethan, biotech. grade, 99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Aluminiumoxid, nanoparticles, 30-60 nm particle size (TEM), 20 wt. % in H2O