D003F3P01

Cartouche de filtration Clarigard^®

nominal pore size 0.3 μm, cartridge nominal length × diam. 30 in. (747.5-752.5 mm) × 2.75 in. (70 mm)

• Code UNSPSC : 23151806

Propriétés

• Matériaux: polypropylene filter
• Niveau de qualité: 400
• Caractéristiques: hydrophilic
• Fabricant/nom de marque: Clarigard^®
• Paramètres: 4.8 bar max. differential pressure (70 psid) at 20 °C
• cartridge nominal length × diam.: 30 in. (747.5-752.5 mm) × 2.75 in. (70 mm)
• Impuretés: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• Extractibles par gravimétrie: ≤10 mg
• Dimension de pores: 0.3 μm nominal pore size; 0.3 μm pore size
• Entrée: sample type liquid
• Code de la cartouche: Code F (Double Open End Flat Gasket)

Description

Description générale

Clarigard^® filters 99.99% retention characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the polypropylene construction offers low extractable levels and broad chemical compatibility.

Notes préparatoires

Sterilization: May be autoclaved for 10 cycles of 30 minutes at 126 °C or steam sterilized for 10 cycles of 30 minutes at 126 °C or hot water sanitized at 80 °C maximum for 30 minutes.

Remarque sur l'analyse

Gravimetric Extractables: After autoclaving and a 24-hour soak in ASTM^® Type 1 reagent grade water at controlled room temperature, meets the USP Oxidizable Substances Test requirements of <10 mg.

Autres remarques

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioborden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartidges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informations légales

ASTM is a registered trademark of American Society for Testing and Materials

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany