Accéder au contenu
Merck
Toutes les photos(1)

Key Documents

1.11136

Supelco

Iron Test Kit, colorimetric

0.1-50 mg/L (Fe), MQuant®

Synonyme(s) :

Iron Visual Test Kit

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme


About This Item

Code UNSPSC :
41116116
Nomenclature NACRES :
NA.24

product name

Iron Test, colorimetric, 0.1-50 mg/L (Fe), for use with MCOLORTEST®

Analyte(s) spécifique(s)

iron

Niveau de qualité

Plage de mesure

0.1-50 mg/L (Fe)

Compatibilité

for use with MCOLORTEST®

Méthode de détection

colorimetric

Température de stockage

15-25°C

Description générale

Method: colorimetric with color-matching vessel 0.1 - 0.3 - 0.5 - 1.0 - 2.5 - 5.0 - 7.5 - 12.5 - 25 - 50 mg/l Fe MQuant®
The MQuant® Iron test (formally MColortest®) measures bivalent and trivalent iron in its dissolved form and also fresh colloidal e.g. in
  • Groundwater and surface water
  • Waters from aquaculture
  • Drinking water and mineral water
  • Industrial water
  • Wastewater and percolating water
  • Boiler and boiler feed water, cooling water
  • Food (e. g. wine) after appropriate sample pretreatment
This test is not suited for seawater.
We also recommend this as a pretest for the oxygen determination with MQuant® Oxygen 1.11107 to check for iron interferences in the sample.

This test evaluates the color reaction based on the transmitted light method. So even turbid and colored water samples can be analyzed without further preparation. The color matching vessel is made of very durable, lightfast plastic, thus suitable for industrial areas and wet environments.

Method
All iron ions are reduced to iron(II) ions by hydroxylammonium chloride. In a buffered medium these react with 2,2′-bipyridine to form a red complex. The iron concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color zones of a color matching vessel.
Without the addition of hydroxylammonium chloride (reagent Fe-1), the test measures only iron(II). so a differentialtion is possible.

Using the refill pack 1.08023 containing all the reagents, the original test kit can be used for a very long time, making this a particularly economical and ecological system. 
The test measures bivalent and trivalent iron in its dissolved form and also fresh colloidal iron(III)hydroxide in e.g. groundwater and surface water, drinking water, industrial water and wastewater, whereas a differentiation between iron(II) and iron(III) is possible.

Informations légales

MCOLORTEST is a registered trademark of Merck KGaA, Darmstadt, Germany
MQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany

Pictogrammes

CorrosionExclamation markHealth hazard

Mention d'avertissement

Warning

Classification des risques

Aquatic Chronic 3 - Carc. 2 - Eye Irrit. 2 - Met. Corr. 1 - Skin Irrit. 2 - Skin Sens. 1

Code de la classe de stockage

8B - Non-combustible, corrosive hazardous materials

Classe de danger pour l'eau (WGK)

WGK 3

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable


Certificats d'analyse (COA)

Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique