Accéder au contenu
MilliporeSigma

Effect of sterilization and crosslinking on gelatin films.

Journal of materials science. Materials in medicine (2015-01-30)
Sofia Amadori, Paola Torricelli, Katia Rubini, Milena Fini, Silvia Panzavolta, Adriana Bigi
RÉSUMÉ

Sterilization through γ-irradiation has been reported to affect collagen mechanical properties, but its possible effects on gelatin based materials have not been investigated up to now. Herein we report the results of a mechanical, chemical and thermal study performed on gelatin films before and after γ-irradiation. The investigation was performed on uncrosslinked films as well as on crosslinked films. To this aim, two common crosslinking agents, glutaraldehyde and genipin, at different concentration (0.15, 0.30 and 0.67%) were used. The results indicate that sterilization significantly affects the mechanical properties of uncrosslinked films, whereas it displays a modest effect on gelatin swelling, release in solution, thermal stability and molecular structure. Both glutaraldehyde and genipin enhance the mechanical properties and stability in solution of the gelatin films. In particular, the values of Young modulus increase as a function of crosslinker concentration up to about 10 and 18 MPa for genipin and glutaraldehyde treated samples respectively. The results of in vitro study demonstrate that the films crosslinked with genipin do not display any cytotoxic reaction, whereas glutaraldehyde crosslinking provokes an acute and dose dependent cytotoxic effect.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Bicarbonate de sodium, ACS reagent, ≥99.7%
Sigma-Aldrich
Copper(II) sulfate pentahydrate, ACS reagent, ≥98.0%
Sigma-Aldrich
Bicarbonate de sodium, powder, BioReagent, for molecular biology, suitable for cell culture, suitable for insect cell culture
Sigma-Aldrich
Bicarbonate de sodium, ReagentPlus®, ≥99.5%, powder
Sigma-Aldrich
Decane, ReagentPlus®, ≥99%
Sigma-Aldrich
Éthanol, ACS reagent, prima fine spirit, without additive, F15 o1
Sigma-Aldrich
Bicarbonate de sodium, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99.7%
Sigma-Aldrich
Copper(II) sulfate pentahydrate, ReagentPlus®, ≥98.0%
Sigma-Aldrich
Copper(II) sulfate pentahydrate, BioReagent, suitable for cell culture, ≥98%
Sigma-Aldrich
Bicarbonate de sodium, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E500, 99.0-100.5%, powder
Sigma-Aldrich
Copper(II) sulfate pentahydrate, puriss., suitable for, meets analytical specification of Ph. Eur., BP, USP,FCC
Sigma-Aldrich
Copper(II) sulfate pentahydrate, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., 99-102%
USP
Bicarbonate de sodium, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Decane, ≥95%
Sigma-Aldrich
Éthanol, purum, fine spirit, denaturated with 4.8% methanol, F25 METHYL1, ~96% (based on denaturant-free substance)
Sigma-Aldrich
Glutaraldéhyde solution, Grade I, 25% in H2O, specially purified for use as an electron microscopy fixative
Sigma-Aldrich
Copper(II) sulfate pentahydrate, suitable for plant cell culture, ≥98%
Sigma-Aldrich
Glutaraldéhyde solution, 50 wt. % in H2O
Sigma-Aldrich
Copper(II) sulfate pentahydrate, 99.999% trace metals basis
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Sigma-Aldrich
Glutaraldéhyde solution, Grade II, 25% in H2O
Sigma-Aldrich
Bicarbonate de sodium, anhydrous, free-flowing, Redi-Dri, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Glutaraldéhyde solution, 50 wt. % in H2O, FCC
Sigma-Aldrich
Copper(II) sulfate pentahydrate, 99.995% trace metals basis
USP
Éthanol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Bicarbonate de sodium, BioXtra, 99.5-100.5%
Sigma-Aldrich
Bicarbonate de sodium, −40-+140 mesh, ≥95%
Supelco
Decane, analytical standard
Sigma-Aldrich
Glutaraldéhyde solution, Grade I, 70% in H2O, specially purified for use as an electron microscopy fixative or other sophisticated use
Sigma-Aldrich
Glutaraldéhyde solution, technical, ~50% in H2O (5.6 M)