Accéder au contenu
MilliporeSigma
  • Sorptive extraction using polydimethylsiloxane/metal-organic framework coated stir bars coupled with high performance liquid chromatography-fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental water samples.

Sorptive extraction using polydimethylsiloxane/metal-organic framework coated stir bars coupled with high performance liquid chromatography-fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental water samples.

Journal of chromatography. A (2014-07-09)
Cong Hu, Man He, Beibei Chen, Cheng Zhong, Bin Hu
RÉSUMÉ

In this work, metal-organic frameworks (MOFs, Al-MIL-53-NH₂) were synthesized via the hydrothermal method, and novel polydimethylsiloxane/metal-organic framework (PDMS/MOFs, PDMS/Al-MIL-53-NH₂)-coated stir bars were prepared by the sol-gel technique. The preparation reproducibility of the PDMS/MOFs-coated stir bar was good, with relative standard deviations (RSDs) ranging from 4.8% to 14.9% (n=7) within one batch and from 6.2% to 16.9% (n=6) among different batches. Based on this fact, a new method of PDMS/MOFs-coated stir bar sorptive extraction (SBSE) and ultrasonic-assisted liquid desorption (UALD) coupled with high performance liquid chromatography-fluorescence detection (HPLC-FLD) was developed for the determination of polycyclic aromatic hydrocarbons (PAHs) in environmental water samples. To obtain the best extraction performance for PAHs, several parameters affecting SBSE, such as extraction time, stirring rate, and extraction temperature, were investigated. Under optimal experimental conditions, wide linear ranges and good RSDs (n=7) were obtained. With enrichment factors (EFs) of 16.1- to 88.9-fold (theoretical EF, 142-fold), the limits of detection (LODs, S/N=3) of the developed method for the target PAHs were found to be in the range of 0.05-2.94 ng/L. The developed method was successfully applied to the analysis of PAHs in Yangtze River and East Lake water samples.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Huile de silicone, viscosity 10 cSt (25 °C)
Sigma-Aldrich
Huile de silicone, viscosity 5 cSt (25 °C)
Sigma-Aldrich
Huile de silicone, viscosity 100 cSt (25 °C)
Sigma-Aldrich
Huile de silicone, viscosity 1,000 cSt (25 °C)
Sigma-Aldrich
Huile de silicone, viscosity 20 cSt (25 °C)
Sigma-Aldrich
Huile de silicone, viscosity 350 cSt (25 °C)
Sigma-Aldrich
Aluminum, wire, diam. 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Huile de silicone, for oil baths (from −50°C to +200°C)
Sigma-Aldrich
Huile de silicone, viscosity 500 cSt (25 °C)
Sigma-Aldrich
Aluminum, granular, <1 mm, 99.7% trace metals basis
Sigma-Aldrich
Huile de silicone, viscosity 50 cSt (25 °C)
Sigma-Aldrich
Huile de silicone, viscosity 10,000 cSt (25 °C)
Sigma-Aldrich
Aluminum, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
Aluminum, ReagentPlus®, beads, 5-15 mm, 99.9% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, ACS reagent, 99%, wire, wire diam. ~1.5 mm
Sigma-Aldrich
Huile de silicone, viscosity 60,000 cSt (25 °C)
Sigma-Aldrich
Aluminum, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Huile de silicone, viscosity 100,000 cSt (25 °C)
Sigma-Aldrich
Aluminum, wire, diam. 0.58 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 8 μm, 99% trace metals basis
Huile de silicone, for melting point and boiling point apparatuses
Aluminum, rod, 1000mm, diameter 12.7mm, 99%
Sigma-Aldrich
Huile de silicone, viscosity 30,000 cSt (25 °C)
Sigma-Aldrich
Aluminum, foil, thickness 1.0 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, evaporation slug, diam. × L 6.3 mm × 6.3 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, pellets, 3-8 mesh, ≥99.999% trace metals basis
Aluminum, sphere, 100pcs, diameter 1.0mm, aluminum alloy 2017 precision sphere, grade 200, 95.2%
Huile de silicone, European Pharmacopoeia (EP) Reference Standard