Accéder au contenu

Meta-analysis of bonding effectiveness to zirconia ceramics.

Meta-analysis of bonding effectiveness to zirconia ceramics.

Journal of dental research (2014-02-25)

M Inokoshi, J De Munck, S Minakuchi, B Van Meerbeek

RÉSUMÉ

Dental zirconia can no longer be considered un-bondable to tooth tissue. In literature, an increasing number of papers indeed report on the bonding effectiveness of different luting techniques to zirconia. We aimed to disclose general trends in bonding to zirconia by systematically collecting zirconia bond-strength data. A search in PubMed and EMBASE revealed 1,371 bond-strength tests reported on in 144 papers. A macro-shear bond-strength protocol was most frequently used; it revealed significantly lower bond strengths and was less discriminative than the other test methods. Regarding luting technique, the combination of mechanical and chemical pre-treatment appeared particularly crucial to obtain durable bonding to zirconia ceramics. The cement choice was not revealed as a determining factor after aging conditions, as long as composite cement was used. Regarding test protocol, a tensile test appeared more discriminative, particularly when combined with 'water storage' aging.

MATÉRIAUX

Référence du produit

Marque

Description du produit

Sigma-Aldrich

Zirconium(IV) oxide, powder, 5 μm, 99% trace metals basis

Sigma-Aldrich

Zirconium(IV) oxide, nanopowder, <100 nm particle size (TEM)

Sigma-Aldrich

Zirconium, foil, thickness 0.1 mm, 99.98% trace metals basis

Sigma-Aldrich

Zirconium(IV) oxide, 99.99% trace metals basis (purity excludes ~2% HfO₂)

Sigma-Aldrich

Zirconium, sponge, ≥99% trace metals basis

Sigma-Aldrich

Zirconium(IV) oxide, nanoparticles, dispersion, <100 nm particle size (BET), 10 wt. % in H₂O

Sigma-Aldrich

Zirconium, rod, diam. 6.35 mm, ≥99% trace metals basis

Sigma-Aldrich

Zirconium(IV) oxide, nanoparticles, dispersion, <100 nm particle size (BET), 5 wt. % in H₂O

Zirconium, foil, light tested, 150x150mm, thickness 0.05mm, annealed, 99.2%

Zirconium, sponge, 500g, max. size 25mm, 99.2%

Zirconium, rod, 100mm, diameter 6.0mm, centerless ground, 99.2%

Zirconium, rod, 500mm, diameter 1.5mm, 99.2%

Zirconium, rod, 100mm, diameter 1.5mm, 99.2%

Zirconium, sponge, 100g, max. size 25mm, 99.2%

Zirconium, foil, 150x150mm, thickness 0.5mm, annealed, 99.2%

Zirconium, rod, 1000mm, diameter 1.5mm, 99.2%

Zirconium, foil, 0.5m coil, thickness 0.5mm, annealed, 99.2%

Zirconium, foil, light tested, 100x100mm, thickness 0.025mm, annealed, 99.2%

Zirconium, foil, 100x100mm, thickness 0.5mm, annealed, 99.2%

Zirconium, foil, 25x25mm, thickness 2.0mm, annealed, 99.2%

Zirconium, foil, 50x50mm, thickness 0.25mm, annealed, 99.2%

Zirconium, foil, 50x50mm, thickness 0.5mm, annealed, 99.2%

Zirconium, foil, light tested, 25x25mm, thickness 0.05mm, annealed, 99.2%

Zirconium, wire reel, 10m, diameter 0.28mm, annealed, 99.2%

Zirconium, rod, 200mm, diameter 1.5mm, 99.2%

Zirconium, sponge, 20g, max. size 25mm, 99.2%

Zirconium, wire reel, 20m, diameter 0.28mm, annealed, 99.2%

Zirconium, sponge, 200g, max. size 25mm, 99.2%

Zirconium, tube, 100mm, outside diameter 1.6mm, inside diameter 1.1mm, wall thickness 0.25mm, hard, 99.2%

Zirconium, rod, 500mm, diameter 5.0mm, centerless ground, 99.2%