503185

Carbon Dioxide Trap

volume 100 cc, 1/8 in. fitting

• Sinônimo(s): CO2 TRAP 100CC, 1/8IN FITTINGS
• Número CE: 215-185-5
• Código UNSPSC: 12000000

Propriedades

• volume: 100 cc
• conector: 1/8 in. fitting

Descrição

Descrição geral

Sodium hydroxide nonfibrous silicate material is universally accepted for its high absorptive capacity and indicating properties for carbon dioxide. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required. As carbon dioxide is absorbed, the greenish-brown material turns white because of the formation of sodium carbonate. The trap body is constructed of borosilicate glass, and the fittings are nickel-plated and have sintered stainless steel frits.

A moisture trap should be installed downstream from this unit to absorb the moisture that is produced.

Note: Exercise extreme caution when refilling the trap due to the caustic nature of the absorbent.

Dimensions:

• 100 cc Traps: 123/4 in. (32.4 cm) long x 13/4 in. (44 mm) diameter
• 250 cc Traps: 171/2 in. (44.4 cm) long x 2 in. (51 mm) diameter

Aplicação

It may be used to connect combustion oven and GCMS separator, for transfer of the gas into MS inlet system which monitors isotope-ratio.

Informações de segurança

• Pictogramas: GHS05
• Palavra indicadora: Danger
• Frases de perigo: H290,H314
• Declarações de precaução: P234 - P260 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338
• Classificações de perigo: Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
• Código de classe de armazenamento: 8B - Non-combustible corrosive hazardous materials
• Classe de risco de água (WGK): WGK 3
• Ponto de fulgor (°F): Not applicable
• Ponto de fulgor (°C): Not applicable
• Equipamento de proteção individual: Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges