CMP473TS1

Cartucho Milligard^® PES 1,2/0,45 µm

pore size 1.2/0.45 μm, cartridge nominal length 30 in. (75 cm)

• Sinônimo(s): Milligard PES 30" 1.2/0.45 μm Cartridge
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propriedades

• Materiais: polyethersulfone membrane; polypropylene housing; polypropylene support; polypropylene vent cap
• Nível de qualidade: 400
• conformidade reg.: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• esterilidade: non-sterile
• Compatibilidade de esterilização: autoclavable compatible; steam-in-place compatible
• linha de produto: EMPROVE^® Filter; Milligard^®
• Características: hydrophilic
• fabricante/nome comercial: Milligard^®
• Parâmetros: 1.38 bar max. differential pressure (20 psid) at 25 °C (Reverse); 5.52 bar max. differential pressure (80 psid) at 4-25 °C (Forward)
• técnica(s): prefiltration: suitable
• Comprimento: 31.8 in.
• Largura: 2.7 in.
• comprimento nominal do cartucho: 30 in. (75 cm)
• Diâmetro: 69 mm (2.71 in.)
• área de filtração: 1.8 m²
• Impurezas: <0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction; meeting requirements of USP <85>, EP 2.6.14 and JP 4.01)
• matriz: Milligard^® PES
• pore size: 1.2/0.45 μm pore size
• entrada: sample type liquid
• código do cartucho: Code 7

Descrição

Descrição geral

Device Configuration: Cartridge

Outras notas

The product is manufactured in a facility which adheres to Good Manufacturing Practices. The manufacturing facility’s Quality Management System is approved by an accredited registering body to the appropriate ISO 9001 Quality Standard.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer wetting instructions of Filters with MILLIGARD^® PES Membrane user guide
• Storage Statement: Please refer Filters with MILLIGARD^® PES Membrane user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Nota de preparo

Sterilization Method
Autoclave wet 25x, 60 minute cycles at 128°C. In-line steam (wet): 10 forward cycles, 30 min.,
135 °C at ≤0.34 bar (5 psid) and 5 reverse cycles,
30 min., 135 °C at ≤0.07 bar (<1 psid)*.
*Devices were validated using steam at full differential pressure starting at 31 psid to a final differential pressure of 1 psid, resulting in a calculated average of 4 psid in forward and reverse directions.

This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Informações legais

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany