Skip to Content
Merck
  • Fast determination of 22 sulfonamides from chicken breast muscle using core-shell nanoring amino-functionalized superparamagnetic molecularly imprinted polymer followed by liquid chromatography-tandem mass spectrometry.

Fast determination of 22 sulfonamides from chicken breast muscle using core-shell nanoring amino-functionalized superparamagnetic molecularly imprinted polymer followed by liquid chromatography-tandem mass spectrometry.

Journal of chromatography. A (2014-05-02)
Yong-Gang Zhao, Li-Xin Zhou, Sheng-Dong Pan, Ping-Ping Zhan, Xiao-Hong Chen, Mi-Cong Jin
ABSTRACT

A novel, simple and sensitive method was developed for the simultaneous determination of 22 sulfonamides (SAs) in chicken breast muscle by using the dispersive micro-solid-phase extraction (d-μ-SPE) procedure combined with ultra-fast liquid chromatography-tandem quadrupole mass spectrometry (UFLC-MS/MS). The excellent core-shell nanoring amino-functionalized superparamagnetic molecularly imprinted polymer (CS-NR-Mag-MIP) was used as sorbent, and the main factors affecting the extraction efficiency were investigated in detail. All target compounds showed good linearities in the tested range with correlation coefficients (r) higher than 0.9980. The mean recoveries were in the range of 85.0-112.2% at low, medium and high concentration levels (0.1, 1.0 and 5.0 ng/g). The intra-day and inter-day relative standard deviations (RSDs) were lower than 6.0% and 8.9%, respectively. The limits of quantification for the 22 SAs were between 0.013 and 0.099 ng/g. The developed d-μ-SPE-UFLC-MS/MS method had been successfully applied to the chicken breast muscle samples for food-safety risk monitoring in Zhejiang Province, China. The results showed sulfamethazine, sulfamethoxazole and sulfaquinoxaline in five out of three hundred collected samples were detected with concentrations of 0.418-2.28, 16.4 and 2.93 ng/g, respectively. It was confirmed that the CS-NR-Mag-MIP was a kind of highly effective d-μ-SPE materials used for the SAs analyses.

MATERIALS
Product Number
Brand
Product Description

Methyl methacrylate, European Pharmacopoeia (EP) Reference Standard
Sulfadoxine, European Pharmacopoeia (EP) Reference Standard
Sulfaguanidine, European Pharmacopoeia (EP) Reference Standard
Sulfafurazole, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Ammonium acetate, ≥99.99% trace metals basis
Sigma-Aldrich
Ammonium acetate, ACS reagent, ≥97%
Supelco
Sulfadoxin, VETRANAL®, analytical standard
Sigma-Aldrich
Iron(III) chloride, sublimed grade, ≥99.9% trace metals basis
Sigma-Aldrich
Methyl methacrylate, 99%, stabilized
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Supelco
Sulfapyridine melting point standard, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Sulfamonomethoxine, VETRANAL®, analytical standard
Sigma-Aldrich
Methyl methacrylate, SAJ first grade, ≥99.0%
Supelco
Sulfaquinoxaline, PESTANAL®, analytical standard
Supelco
Sulfamethizole, VETRANAL®, analytical standard
Sigma-Aldrich
Ammonium acetate solution, 50 % (w/v), for copper determination
Supelco
Sulfamethoxypyridazine, VETRANAL®, analytical standard
Supelco
Sulfamethazine, VETRANAL®, analytical standard
Sigma-Aldrich
Ammonium acetate solution, BioUltra, for molecular biology, ~5 M in H2O
Sigma-Aldrich
Ammonium acetate, BioUltra, for molecular biology, ≥99.0%
Sigma-Aldrich
Iron(III) chloride, anhydrous, powder, ≥99.99% trace metals basis
Sigma-Aldrich
Luperox® A75, Benzoyl peroxide, 75%, remainder water
Sigma-Aldrich
Divinylbenzene, technical grade, 80%
Sigma-Aldrich
Divinylbenzene, technical grade, 55%
Sigma-Aldrich
Glycidyl methacrylate, 97%, contains 100 ppm monomethyl ether hydroquinone as inhibitor
Sigma-Aldrich
Luperox® AFR40, Benzoyl peroxide solution, 40 wt. % in dibutyl phthalate
Sigma-Aldrich
Ammonium acetate, 99.999% trace metals basis
Supelco
Ammonium acetate, LiChropur, eluent additive for LC-MS
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (v/v) trifluoroacetic acid