Saltar al contenido
Merck

Adsorption of modified halloysite nanotubes in vitro and the protective effect in rats exposed to zearalenone.

Archives of animal nutrition (2014-07-01)
Yuanyuan Zhang, Rui Gao, Min Liu, Changjiang Yan, Anshan Shan
RESUMEN

The aim of the present study was to investigate the sorption properties in vitro and the application feasibility of modified halloysite nanotubes (HNT) in reducing the toxic effect of ZEN in rats in vivo. HNT were modified using the surfactant stearyldimethylbenzylammonium chloride. Modified HNT (MHNT) was evaluated using electron microscopy, which revealed that the modification had successfully enlarged the nanotube inner diameter from 11.35 to 20.12 nm. In an in vitro study, the efficiency of MHNT to adsorb zearalenone (ZEN) from simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) was investigated in comparison with HNT or a montmorillonite mixture (MON). For all tested adsorbents, the adsorption efficiency for ZEN was increased when the adsorbent dose rose from 0.4 to 1.0 mg/ml and became stable beyond this dose. Moreover, the ZEN adsorption increased with the extension of adsorption times from 20 to 90 min (SGF) and from 30 to 120 min (SIF) without further increase afterwards. Already at the first measuring times (20 and 30 min for SGF and SIF, respectively) MHNT showed a higher adsorptive property then HNT. The ability of MHNT to prevent lesions caused by ZEN was evaluated in 60 female rats. The rats received five experimental diets for two weeks: Control (per kg diet 0.001 mg ZEN); ZEN (0.5 mg ZEN), HNT (0.5 mg ZEN + 1% HNT), MHNT (0.5 mg ZEN + 1% MHNT) and MON (0.5 mg ZEN + 1% MON). The results indicated that the tested adsorbents mitigated toxic and estrogenic effects of ZEN exposure including changes in oxidative stress biomarkers and organ weights. In some parameters (gain, oestradiol content in serum and ZEN concentration in reproductive organs), MHNT exceeded the effectiveness of HNT. Thus, it can be concluded that the modification enhances the adsorbent properties of HNT and that MHNT can bind to ZEN in animal feed or in the gastrointestinal tract.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Metanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Cloroformo, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Metanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Metanol, BioReagent, ≥99.93%
Sigma-Aldrich
Metanol, Absolute - Acetone free
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformo, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
USP
Metanol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Cloroformo, biotech. grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, meets analytical specification of BP, 99-99.4% (GC)
Sigma-Aldrich
Metanol, anhydrous, 99.8%
Sigma-Aldrich
Metanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Cloroformo, ≥99%, PCR Reagent, contains amylenes as stabilizer
Sigma-Aldrich
Cloroformo, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Supelco
Cloroformo, analytical standard
Supelco
Cloroformo, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Metanol, Pharmaceutical Secondary Standard; Certified Reference Material