Saltar al contenido
Merck

Adhesion and biofilm formation by periodontopathogenic bacteria on different commercial brackets.

European journal of paediatric dentistry : official journal of European Academy of Paediatric Dentistry (2013-12-04)
C Passariello, P Gigola
RESUMEN

To compare early bacterial adhesion and biofilm formation of common and uncommon periodontal pathogens on a variety of commercial brackets in vitro. In vitro adhesion and biofilm formation of 4 bacterial strains on 15 different commercial brackets, in standard culture mediums with and without addition of either serum or human saliva was evaluated by quantitative real time PCR after extraction of bacterial DNA. Materials significantly influenced bacterial adhesiveness in a species-specific way. Titanium and gold brackets constantly yielded the lowest values with all tested bacteria and in all tested conditions. Bracket materials and medium of growth significantly influenced biofilm formation. Materials and environmental conditions significantly influence biofilm formation by periodontal pathogens at the surface of brackets. Whenever possible brackets should be kept far from the gingival margin and if this is not possible, brackets made of gold, titanium, and ceramic should be preferentially used.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Óxido de alúmina, activated, basic, Brockmann I
Sigma-Aldrich
Óxido de alúmina, activated, neutral, Brockmann I
Sigma-Aldrich
Óxido de alúmina, powder, 99.99% trace metals basis
Sigma-Aldrich
Óxido de alúmina, activated, acidic, Brockmann I
Sigma-Aldrich
Óxido de alúmina, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
Óxido de alúmina, powder, primarily α phase, ≤10 μm avg. part. size, 99.5% trace metals basis
Sigma-Aldrich
Aluminum oxide, nanoparticles, <50 nm particle size (DLS), 20 wt. % in isopropanol
Sigma-Aldrich
Óxido de alúmina, Corundum, α-phase, -100 mesh
Sigma-Aldrich
Óxido de alúmina, pellets, 3 mm
Sigma-Aldrich
Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, powder, <45 μm avg. part. size, 99.98% trace metals basis
Sigma-Aldrich
Óxido de alúmina, nanopowder, 13 nm primary particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
Óxido de alúmina, fused, powder, primarily α-phase, -325 mesh
Sigma-Aldrich
Óxido de alúmina, 99.997% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
Óxido de alúmina, pore size 58 Å, ~150 mesh
Sigma-Aldrich
Óxido de alúmina, Type WN-6, Neutral, Activity Grade Super I
Sigma-Aldrich
Aluminum oxide, nanoparticles, 30-60 nm particle size (TEM), 20 wt. % in H2O
Sigma-Aldrich
Titanium, powder, −100 mesh, 99.7% trace metals basis
Sigma-Aldrich
Óxido de alúmina, fused, powder, primarily α-phase, 100-200 mesh
Sigma-Aldrich
Óxido de alúmina, single crystal substrate, <0001>
Sigma-Aldrich
Aluminum oxide, mesostructured, MSU-X (wormhole), average pore size 3.8 nm
Sigma-Aldrich
Óxido de alúmina, activated, neutral, Brockmann I, free-flowing, Redi-Dri
Sigma-Aldrich
Titanium, sponge, 1-20 mm, 99.5% trace metals basis
Sigma-Aldrich
Óxido de alúmina, activated, acidic, Brockmann I, free-flowing, Redi-Dri
Sigma-Aldrich
Titanium, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
Titanium, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis