Saltar al contenido
Merck
  • Fluorescence spectroscopy of PTCDA molecules on the KCl(100) surface in the limit of low coverages: site selection and diffusion.

Fluorescence spectroscopy of PTCDA molecules on the KCl(100) surface in the limit of low coverages: site selection and diffusion.

Physical chemistry chemical physics : PCCP (2013-02-26)
Alexander Paulheim, Mathias Müller, Christian Marquardt, Moritz Sokolowski
RESUMEN

We performed fluorescence (FL) and fluorescence excitation (FLE) spectroscopy on the model molecule perylene-3,4,9,10-tetracarboxyl acid dianhydride (PTCDA) for very low coverages (below 1% of a monolayer) on thin (100) oriented KCl films. Two different states of PTCDA molecules can be distinguished in the spectra: an initial state, which is observed directly after deposition of the molecules onto the cold sample at 20 K, and a final state, which is found after intensive optical excitation or thermal annealing of the sample. The spectrum of the final state is blue-shifted with respect to that of the initial state by 130 ± 15 cm(-1) and exhibits lines with significantly reduced widths. This can be explained by diffusion of molecules from initially populated terrace sites to energetically favoured step edge sites. Polarization dependent spectroscopy reveals the same azimuthal orientation of the molecules on both adsorption sites and leads to a model of the adsorption geometry of PTCDA at the KCl step sites. Our experiment demonstrates how optical spectroscopy can be used to investigate kinetic processes of fluorescent molecules on surfaces.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Cloruro de potasio, ACS reagent, 99.0-100.5%
Sigma-Aldrich
Cloruro de potasio, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E508, 99-100.5% (AT), ≤0.0001% Al
Sigma-Aldrich
Cloruro de potasio, for molecular biology, ≥99.0%
Sigma-Aldrich
Cloruro de potasio, powder, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99.0%
Sigma-Aldrich
Cloruro de potasio, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Cloruro de potasio solution, BioUltra, for molecular biology, ~1 M in H2O
Sigma-Aldrich
Cloruro de potasio, puriss. p.a., ≥99.5% (AT)
Sigma-Aldrich
Cloruro de potasio, BioUltra, for molecular biology, ≥99.5% (AT)
Sigma-Aldrich
Cloruro de potasio, 99.999% trace metals basis
Sigma-Aldrich
Cloruro de potasio, ≥99.99% trace metals basis
Sigma-Aldrich
Perylene, sublimed grade, ≥99.5%
Supelco
Potassium chloride solution, for Ag/AgCl electrodes, ~3 M KCl, saturated with silver chloride
Sigma-Aldrich
Cloruro de potasio, BioXtra, ≥99.0%
Sigma-Aldrich
Cloruro de potasio, AnhydroBeads, −10 mesh, 99.999% trace metals basis
Supelco
Cloruro de potasio solution, 1 M KCl
Sigma-Aldrich
Cloruro de potasio, AnhydroBeads, −10 mesh, 99.99% trace metals basis
Sigma-Aldrich
Cloruro de potasio solution, 0.075 M, sterile-filtered, BioXtra, suitable for cell culture
Supelco
Cloruro de potasio solution, BioUltra, ~3 M in H2O
Sigma-Aldrich
Perylene, ≥99%
Supelco
Cloruro de potasio solution, conductance standard A acc. to ISO 7888, 0.1 M KCl
Sigma-Aldrich
Cloruro de potasio, tested according to Ph. Eur.
Supelco
Cloruro de potasio solution, conductance standard B acc. to ISO 7888, 0.01 M KCl
Supelco
Cloruro de potasio solution, conductance standard C acc. to ISO 7888, 0.001 M KCl