21567-U

Supelite DAX-8

jar of 1000 g

• Sinónimos: XAD-8
• UNSPSC Code: 23151817
• NACRES: SB.52

Propiedades

• form: solid
• packaging: jar of 1000 g
• technique(s): HPLC: suitable; LPLC: suitable; ion chromatography: suitable
• surface area: 140 m²/g
• matrix: acrylic ester
• matrix active group: polymer
• particle size: 40-60 mesh
• pore size: ~0.79 mL/g pore volume; 225 Å mean pore size
• density: 1.09 g/mL at 25 °C (true wet)(lit.); 1.23 g/mL at 25 °C (skeletal)(lit.)
• separation technique: reversed phase

Descripción

General description

Supelite DAX-8 is a nonfunctionalised resin with strong hydrophobic organic matter endorsed to humic and fulvic acids. It is also referred as polymethylmethacrylate resin.

Application

Supelite DAX-8 was used as an absorbent in:

• HPLC-SEC fractionation system
• column chromatography.
• extraction procedure and these extracts were analysed using Cary Eclipse fluorescence spectrophotometer

Adsorbent resin with moderate polarity for compounds up to 150,000 MW. Most commonly used for adsorption of fulvic and humic acids, treatment of paper pulp mill waste, and removal of alcohols, surfactants, and colorants from samples.

Preparation Note

DAX-8 is a salt imbibed resin, which requires some preparation prior to use. In the protocol below, you may use methanol in place of ethanol.

• First, rinse the adsorbent resin with 2-3 bed volumes (BV) of distilled water.
• Soak overnight in 2 BV of 95% ethanol.
• After soaking, the resin is introduced into the column and rinsed with an additional 2 BV of 95% ethanol.
• Rinse with 2 BV of distilled water to displace the ethanol, followed by 1 BV of 4% (w/v) sodium hydroxide, 2 BV of distilled water, 1 BV 4% (v/v) hydrochloric acid, and finally by distilled water until the pH of the eluent becomes neutral.

Legal Information

Información de seguridad

• Storage Class: 11 - Combustible Solids
• wgk_germany: WGK 3
• flash_point_f: Not applicable
• flash_point_c: Not applicable
• ppe: Eyeshields, Gloves, type N95 (US)