Skip to Content
Merck

Azide-tagged sphingolipids: new tools for metabolic flux analysis.

Chembiochem : a European journal of chemical biology (2015-02-14)
María Garrido, José Luis Abad, Gemma Fabriàs, Josefina Casas, Antonio Delgado
ABSTRACT

Several diseases involve alterations in sphingolipid metabolism, so the development of tools for the analysis of sphingolipid metabolic fluxes is of interest. In this work, ω-azidosphingolipids 1-3 have been synthesized and tested as tracers in live cells. The synthesis starts from (S)-Garner's aldehyde and uses bromide or tosyloxy precursors for the introduction of the azido group into the sphingoid base. Studies in HGC-27 cells showed that probes 1-3 compete with the natural metabolites and are incorporated into sphingolipid pathways without affecting cell viability. The reactivity and bioorthogonality of the terminal azido group have been exploited by means of click reactions with different azadibenzocyclooctyne tags. This allows the mass spectrometric characterization of azidosphingolipidomes in pooled samples from different cell populations after independent treatments, providing proof of concept of the applicability of this technology in sphingolipid metabolic flux analysis.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, NMR reference standard
Sigma-Aldrich
Rhodium, powder, 99.95% trace metals basis
Supelco
Methanol, analytical standard
Sigma-Aldrich
Rhodium on alumina, extent of labeling: 5 wt. % loading, matrix alumina support, powder
Sigma-Aldrich
Aluminum oxide, mesoporous, MSU-X (wormhole), average pore size 3.8 nm
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Supelco
Aluminum oxide, activated, neutral, Brockmann Activity I
Rhodium, foil, not light tested, 25x25mm, thickness 0.012mm, as rolled, 99.9%
Rhodium, foil, not light tested, 50x50mm, thickness 0.00075mm, permanent polyester support, 99.85%
Rhodium, foil, 25x25mm, thickness 0.125mm, as rolled, 99.9%
Rhodium, microfoil, disks, 10mm, thinness 0.50μm, specific density 620μg/cm2, permanent mylar 3.5μm support, 99.99%
Rhodium, foil, light tested, 15x15mm, thickness 0.05mm, as rolled, 99.9%
Rhodium, foil, not light tested, 25x25mm, thickness 0.00075mm, permanent polyester support, 99.85%
Rhodium, foil, not light tested, 25x25mm, thickness 0.006mm, as rolled, 99.9%
Rhodium, microfoil, disks, 25mm, thinness 0.1μm, specific density 124μg/cm2, permanent mylar 3.5μm support, 99.9%
Rhodium, foil, not light tested, 25x25mm, thickness 0.001mm, permanent polyester support, 99.85%
Rhodium, foil, not light tested, 50x50mm, thickness 0.006mm, as rolled, 99.9%
Rhodium, foil, light tested, 25x25mm, thickness 0.05mm, as rolled, 99.9%
Rhodium, foil, not light tested, 50x50mm, thickness 0.00025mm, permanent polyester support, 99.9%
Rhodium, wire reel, 0.5m, diameter 0.12mm, as drawn, 99.9%
Rhodium, wire reel, 0.05m, diameter 0.12mm, as drawn, 99.9%
Rhodium, foil, light tested, 25x25mm, thickness 0.05mm, as rolled, x-ray quality, 99.9%
Rhodium, foil, 25x25mm, thickness 0.1mm, as rolled, 99.9%
Rhodium, wire reel, 0.05m, diameter 0.25mm, hard, 99.9%
Rhodium, foil, light tested, 25x25mm, thickness 0.075mm, as rolled, 99.9%
Rhodium, microfoil, disks, 10mm, thinness 0.1μm, specific density 124μg/cm2, permanent mylar 3.5μm support, 99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Methanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%